A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
What did you do to your jimny today?
- Statey
- New Member
-
Public
27 Feb 2016 23:36 #163071
by Statey
Replied by Statey on topic What did you do to your jimny today
I 'test fitted' a body lift!
I'm currently doing some boot floor work and had some old aluminum blocks from a previous motor that fit but the center hole isn't big enough for me just to buy the bolts.
So I've done all the hard work etc and it gives me better access while working and painting.
Will have to get a proper lift before it gets moved
I'm currently doing some boot floor work and had some old aluminum blocks from a previous motor that fit but the center hole isn't big enough for me just to buy the bolts.
So I've done all the hard work etc and it gives me better access while working and painting.
Will have to get a proper lift before it gets moved
Please Log in or Create an account to join the conversation.
- 1066Boy
- New Member
-
Public
29 Feb 2016 19:59 #163147
by 1066Boy
I have the same tyres on mine, you wont reget it.
Replied by 1066Boy on topic What did you do to your jimny today
Spendersjim wrote: Had four Yokohama Geolandar A/T-S tires fitted (had a few small scares similar to Halford), got home and did kingpin bearings and oil seal on drivers side.
Been putting it off for ages but tire fitter reckoned it was better done sooner rather than later. And I don't think he liked getting plastered in greasy gunk while fitting the tire.
I have the same tyres on mine, you wont reget it.
Please Log in or Create an account to join the conversation.
- ewanm77
- New Member
-
Public
- Spendersjim
- New Member
-
Public
29 Feb 2016 21:00 #163171
by Spendersjim
Replied by Spendersjim on topic What did you do to your jimny today
Ideal!!
I've yet to try them out properly, did a local lane to test the kingpin job was okay but it was nothing more than an unsurfaced road.
Just a bit bumpy no more than a 2wd trundle.
I've yet to try them out properly, did a local lane to test the kingpin job was okay but it was nothing more than an unsurfaced road.
Just a bit bumpy no more than a 2wd trundle.
Please Log in or Create an account to join the conversation.
- 1066Boy
- New Member
-
Public
29 Feb 2016 21:02 #163173
by 1066Boy
Replied by 1066Boy on topic What did you do to your jimny today
Gave Jimbob a clean, inside and out ready for a trip to the airport saturday. 
Please Log in or Create an account to join the conversation.
- ewanm77
- New Member
-
Public
01 Mar 2016 14:39 #163198
by ewanm77
Replied by ewanm77 on topic What did you do to your jimny today
got 5 of these fitted
Please Log in or Create an account to join the conversation.
Time to create page: 0.270 seconds