Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
VIAIR tank with ARB compressor
- Keefe
- New Member
-
Public
- Thank you received: 0
Another good reason as well as tyre pumping......

I fitted this exact same kit, in the video clip, in my Suzuki Carry van a while back.
Compressor/tank in an old steel filing drawer bolted under the rear end where the spare tyre was.
The horns under the bonnet, plenty of room due to engine being under the seats.
Right laugh! :laugh: :laugh:
Please Log in or Create an account to join the conversation.
- Sponnie
- Topic Author
- New Member
-
Public
- Thank you received: 0
I don't condone irresponsible use, but those "non english" people last week who cut me and a biker up. Then tried knocking the biker off for being rightly peed off and upset. Would have deserved a good toot on this!!
Please Log in or Create an account to join the conversation.
- Keefe
- New Member
-
Public
- Thank you received: 0
I dropped on a triple set of horns, tubing, brackets, compressor (attached to tank), switch, etc etc on Ebay from a company down south around 4 years ago.
They just had this set left, from an American company, brand new and if I remember correctly, they cost me £120 inc p+p.
When I sold the Carry, if I had known it was being exported to Nigeria, HONEST! I would have removed them. :dry:
If you have a compressor already and tank then easy peasy. All you need are your horns, tubing, I used the same or similar to Martins' breather pipe, 8 or 6mm (?)
Push to fit connectors, relay, switch and a 12v valve.
All bits easily sourced.
Have fun.
Sorry for robbing the thread.
Mods please move if needed..
K

Please Log in or Create an account to join the conversation.
- Sponnie
- Topic Author
- New Member
-
Public
- Thank you received: 0
Keefe wrote: LoL!
I dropped on a triple set of horns, tubing, brackets, compressor (attached to tank), switch, etc etc on Ebay from a company down south around 4 years ago.
They just had this set left, from an American company, brand new and if I remember correctly, they cost me £120 inc p+p.
When I sold the Carry, if I had known it was being exported to Nigeria, HONEST! I would have removed them. :dry:
If you have a compressor already and tank then easy peasy. All you need are your horns, tubing, I used the same or similar to Martins' breather pipe, 8 or 6mm (?)
Push to fit connectors, relay, switch and a 12v valve.
All bits easily sourced.
Have fun.
Sorry for robbing the thread.
Mods please move if needed..
K
Thanks Keefe. I'll get on it.
Please Log in or Create an account to join the conversation.
- Smoggy
- New Member
-
Public
- Thank you received: 0
Does the tank just make it quicker or place less stress on the compressor?
Please Log in or Create an account to join the conversation.
- reaper
- New Member
-
Public
- Thank you received: 0
Dont want the old one back ta mate see if anyone wants it or weigh it in

Please Log in or Create an account to join the conversation.