Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
HD Halfshafts and CV's
- Sponnie
- New Member
-
Public
- bluejimny
- Topic Author
- New Member
-
Public
- Sponnie
- New Member
-
Public
bluejimny wrote: well ive been driving around for over 400 miles now with the 1st kit installed and all is fine, but not been off roading yet, i have all the equipment and tooling now to manufacture them but i dont have the time, plus im moving in december so its looking to be around feb-mar time when they will be on the shelf as i have a toolmaker starting with me in jan
I'm running standard shafts on the 33's and done half a dozen pay 'n play's with no breakages. Sounds like you need to give them a thrashing so you can report back.
Are you running a front locker??
Cheers
Please Log in or Create an account to join the conversation.
- bluejimny
- Topic Author
- New Member
-
Public
- Sponnie
- New Member
-
Public
bluejimny wrote: i no i need to get out soon, not been out since last year in the jimny! just been so busy no , no locker but might be tempted to fit one and see how it goes, but all being well ill be out the end of this month!
Good man
I defo will get lockers when the pockets allow. But not without some uprated shafts!
Please Log in or Create an account to join the conversation.
When's the first load of HD shafts and CV's gonna be ready?
Will they fit my standard diff?
I want! I might sound like an impatient child but I'm not. I'm an impatient adult!
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.