Product Information

These adaptor rings fit between the main wheel hubs and SJ/Vitara Manual Freewheeling hubs, allowing them to be fitted without any modification to your Jimny (You could remove and cut the hub nut to fit them, this kit makes it all simply bolt on). The picture below shows the kit complete with 12 x M8 Socket head bolts to fit them with.

In addition to the above you will require some manual hubs removed from an old SJ/Vitara (these are NOT included in the kit!!!)

In particular make sure you get the Cone Washers from the original SJ hubs as these are needed in the fitting.

Modifying your vehicle can alter its driving characteristics. . All modifications on this website are for off-road use only, any other use is at your own risk.

HERE IS THE GUIDE TO FITTING THEM

Be the first to review this product!

Price: £25.00

• Write review / comment