Product Information

A 3" Spring lift Kit to fit a Jimny. (75mm for those of you in Metric)

This kit contains Front and Rear extended Springs and 4 extended Shock Absorbers designed to lift your Jimny by 3".

The springs are high quality, British Made, springs coated in Black Powder Coat.

The shock absorbers are high quality Rough Country Gas Shock absorbers matched to the lift.

Please note:

• Extended brake lines will be required
• Caster Correction (Arms or Bushes) are strongly recommended.

As with all BigJimny products the price displayed is what you pay.

PLEASE READ THIS CAREFULLY

Two different sizes of Shock Absorber are available for the 3" Lift kit. This is because the size ranges from Rough Country cross over at 3 inches. One size range fits up to 3" and the other fits 3" and above.

The standard size offered is the 3" AND ABOVE length. These will permit you to go even higher in future by fitting Spring Spacers without the need to change the shock absorbers again. The downside of these is the possibility of Spring dislocation when extreme articulating as the shocks allow the axle to drop further. Note that "Goodrich" extended brake lines tend to be too short for these shocks, BigJimny ones are just right!

The optional size offered is the UP TO 3" length. These slightly shorter shocks restrict slightly the axle drop, therefore preventing Spring dislocation happening. If you dont want to go higher in the future and want the axle drop to be more controlled then you should choose these, note that there is currently a 10 day delay on shipping this size of shock absorber. You can use Goodrich extended brake lines with these shocks.

Thanks to Kirkynut who help test the early kits for me.

You may also like these other products as well, click on the images....

Extended Brake Lines	Castor Correction Bushes	Offroad Armory Spring Retainers (link to website)

Be the first to review this product!

Price: £360.00

• Write review / comment