×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A section for Vitara and SJ owners.
If you have not yet upgraded to a Jimny then you can discuss your current Suzuki 4x4 here!
If you have not yet upgraded to a Jimny then you can discuss your current Suzuki 4x4 here!
Head light mounts
- lesgrandepotato
- Topic Author
- Offline
- Elite Member
-
Registered
Less
More
- Posts: 176
- Thank you received: 54
- Points: 1029.00
25 Jun 2023 17:34 #249629
by lesgrandepotato
Head light mounts was created by lesgrandepotato
Ok. I’m confused. I’ve got some new indian beauty rings. Some new wings from Taiwan. Some chunky plastic circles that may or may not be part of the solution.
I’ve heard tell of asymmetric headlamp rings and evenly spaced ones.
I cannot figure out how any of the bits may or may not fit together. Does anyone have a diagram / photo?
I’ve heard tell of asymmetric headlamp rings and evenly spaced ones.
I cannot figure out how any of the bits may or may not fit together. Does anyone have a diagram / photo?
Please Log in or Create an account to join the conversation.
- lesgrandepotato
- Topic Author
- Offline
- Elite Member
-
Registered
Less
More
- Posts: 176
- Thank you received: 54
- Points: 1029.00
25 Jun 2023 17:48 #249630
by lesgrandepotato
Replied by lesgrandepotato on topic Head light mounts
I’m minded to buy a set of these.
Lights
Thoughts? Might need spacing for depth but at least I’d have all the bits.
Lights
Thoughts? Might need spacing for depth but at least I’d have all the bits.
Please Log in or Create an account to join the conversation.
25 Jun 2023 19:18 #249631
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Head light mounts
So our SJ413 (1986) came with 3 point fixings spaced like a letter Y on its side, our new cheap samurai came with the point fixings equally spaced, I believe that the Samurai ones have an additional bowl that fixes to the points whilst in the original SJ413 the headlamps fit direct to the mounting points
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: lesgrandepotato
Please Log in or Create an account to join the conversation.
- lesgrandepotato
- Topic Author
- Offline
- Elite Member
-
Registered
Less
More
- Posts: 176
- Thank you received: 54
- Points: 1029.00
25 Jun 2023 19:45 #249632
by lesgrandepotato
Replied by lesgrandepotato on topic Head light mounts
Thanks Martin, I’ve ordered a set of standard bowls for a mini etc. I’ll fabricate some mounts. At least I’ll know the bits are meant to be together even if not on this car.
Once I have that I can set the grill and then adjust the wings to fit…
Once I have that I can set the grill and then adjust the wings to fit…
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1768
- Thank you received: 333
- Points: 7195.00
-
27 Jun 2023 11:01 #249642
by yakuza
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Replied by yakuza on topic Head light mounts
I am a bit concerned for the cooling in the bowls if hot halogene bulbs are used..
I tried to put Golf II headlights on my SJ but even though they where 7" they did not fit the Suzuki rings. My '84 got the uneven Y-type.
I tried to put Golf II headlights on my SJ but even though they where 7" they did not fit the Suzuki rings. My '84 got the uneven Y-type.
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Please Log in or Create an account to join the conversation.
Time to create page: 0.097 seconds