-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
HELP sohc cylinder head question
×
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
HELP sohc cylinder head question
-
markyp2000
-
Topic Author
-
Visitor
-
Public
12 Aug 2012 19:39 #46036
by markyp2000
on stripping my cylinder head down to carry out a rebuild i found this item that clips on the rocker shaft then clips on to the cam follower 2 of them are ok but the rest have broken are they realy needed
Please Log in or Create an account to join the conversation.
-
Dave c
-
-
Visitor
-
Public
12 Aug 2012 20:39 #46052
by Dave c
Ive got 1 missing as well was busted when i took the cam out cant really see what they do did think about going to Suzuki just to see how much they were just for a damn good laugh
Please Log in or Create an account to join the conversation.
-
markyp2000
-
Topic Author
-
Visitor
-
Public
12 Aug 2012 21:16 #46062
by markyp2000
thats what i thought as the cam holds them down are you running with one missing or you still rebuliding it
Please Log in or Create an account to join the conversation.
-
Dave c
-
-
Visitor
-
Public
13 Aug 2012 08:46 #46089
by Dave c
Its running mate
just cant really see what they are for other than to hold it together during assembly if they are there to
stop the fingers coming out under high revs then they are pretty weak and rubbish cant see they would stop the fingers jumping out and really there is no reason why they would want to come out anyway.
Please Log in or Create an account to join the conversation.
-
markyp2000
-
Topic Author
-
Visitor
-
Public
13 Aug 2012 18:16 #46115
by markyp2000
i found out the clip are there just to hold them down while putting it all back together
Please Log in or Create an account to join the conversation.
-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
HELP sohc cylinder head question
Time to create page: 0.081 seconds