-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
Jimny valve clearances.
×
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Jimny valve clearances.
-
bazzab
-
Topic Author
-
Visitor
-
Public
11 Aug 2012 20:02 #45934
by bazzab
Hi all,
Did head gasket today phew what a job.
All ok apart from got a noisey valve. Did adjust them but in manual i have it said line crank pully notch up with 0 marking on timing cover. Only problem is my crank pully dosent have a notch in it!!
Anyone got any tips for getting it all set up ok for adjusting the bad boys?
Many thanks in advance.
Bazza.
Please Log in or Create an account to join the conversation.
-
markyp2000
-
-
Visitor
-
Public
11 Aug 2012 20:10 #45935
by markyp2000
if it dont have a notch how did you set the valve timing
Please Log in or Create an account to join the conversation.
-
markyp2000
-
-
Visitor
-
Public
11 Aug 2012 20:14 #45936
by markyp2000
get number 1 cylinder inlet and exhaust valves rocking and adjust cylinder 4
cyl 2 rocking do 3
cyl 3 rocking do 2
cyl 4 rocking do 1
inlet 0.17mm to 0.21 mm
exhaust 0.27mm to 0.31 mm
and thay are adjusted when hot
Please Log in or Create an account to join the conversation.
-
bazzab
-
Topic Author
-
Visitor
-
Public
11 Aug 2012 20:20 #45940
by bazzab
markyp2000 wrote: if it dont have a notch how did you set the valve timing
Used the dent in the bottom cam belt pulley as opposed to ancillary belt pulley. As stated in manual.
Please Log in or Create an account to join the conversation.
-
bazzab
-
Topic Author
-
Visitor
-
Public
11 Aug 2012 20:21 #45941
by bazzab
markyp2000 wrote: get number 1 cylinder inlet and exhaust valves rocking and adjust cylinder 4
cyl 2 rocking do 3
cyl 3 rocking do 2
cyl 4 rocking do 1
inlet 0.17mm to 0.21 mm
exhaust 0.27mm to 0.31 mm
and thay are adjusted when hot
You sir are a true gent. I really appreciate that. Again your advice is blooming bang on.
King regards.
Bazza.
Please Log in or Create an account to join the conversation.
-
markyp2000
-
-
Visitor
-
Public
11 Aug 2012 20:37 - 11 Aug 2012 20:42 #45942
by markyp2000
the dent in the cam pully should be pointing to 12oclock on the bottom
im doing a full rebuild on mine and found one of the conrods bent and the valve guides shot as well i was hoping to get mine all done this weekend but no thing always go wrong on my own cars
Last edit: 11 Aug 2012 20:42 by markyp2000.
Please Log in or Create an account to join the conversation.
-
bazzab
-
Topic Author
-
Visitor
-
Public
12 Aug 2012 08:50 #45961
by bazzab
Yes mate was at 12o'clock on bottom oil pump pulley.
Oh nice that sounds lovely. It hadn't been running like that had it?
Please Log in or Create an account to join the conversation.
-
markyp2000
-
-
Visitor
-
Public
12 Aug 2012 19:56 #46042
by markyp2000
when you did your head did you take the inlet rockers off and find any thing like this
Please Log in or Create an account to join the conversation.
-
bazzab
-
Topic Author
-
Visitor
-
Public
13 Aug 2012 21:04 #46137
by bazzab
MAN ALIVE that looks scarey!!!! What a mess. What was that?
Nothing like that in mine, I did however find a blanket but with a different pattern though Hahaha..sorry couldn't help it.
Please Log in or Create an account to join the conversation.
-
markyp2000
-
-
Visitor
-
Public
13 Aug 2012 21:12 #46139
by markyp2000
thats nothing you wanna look at the pics i posted of my conrods and way i found out what the clips do and there not realy needed
Please Log in or Create an account to join the conversation.
-
bazzab
-
Topic Author
-
Visitor
-
Public
14 Aug 2012 19:18 #46186
by bazzab
Blooming hec that bad???
Where about are pics mate? Had look threw ya costs and couldn't find em.
Please Log in or Create an account to join the conversation.
-
markyp2000
-
-
Visitor
-
Public
-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
Jimny valve clearances.
Time to create page: 0.141 seconds
