×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
4x4 not working, with manual hubs
12 Nov 2023 09:11 - 12 Nov 2023 11:14 #252082
by Ht03
4x4 not working, with manual hubs was created by Ht03
Sorry to sound completely useless but it’s baffling me. The transfer box I assume still works as low box still engages. I don’t think it’s the diff as I can’t spin the front prop when in 4wd and I can when in 2.
I have manual hubs too, recently I rebuilt the axles but I took these off in the two parts. Didn’t actually interfere with the internals of them so can’t see where I would’ve got that wrong. No unusual noises either.
Any ideas please before I start crawling round in the wet outside, Cheers
I have manual hubs too, recently I rebuilt the axles but I took these off in the two parts. Didn’t actually interfere with the internals of them so can’t see where I would’ve got that wrong. No unusual noises either.
Any ideas please before I start crawling round in the wet outside, Cheers
Please Log in or Create an account to join the conversation.
12 Nov 2023 13:01 #252087
by fordem
What makes you think it's not working? What are the symptoms?
Replied by fordem on topic 4x4 not working, with manual hubs
Sorry to sound completely useless but it’s baffling me. The transfer box I assume still works as low box still engages. I don’t think it’s the diff as I can’t spin the front prop when in 4wd and I can when in 2.
I have manual hubs too, recently I rebuilt the axles but I took these off in the two parts. Didn’t actually interfere with the internals of them so can’t see where I would’ve got that wrong. No unusual noises either.
Any ideas please before I start crawling round in the wet outside, Cheers
What makes you think it's not working? What are the symptoms?
Please Log in or Create an account to join the conversation.
12 Nov 2023 13:40 #252088
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic 4x4 not working, with manual hubs
Engage the hubs with the transfer in 2wd, and try and turn the front propshaft.
If you can't turn it round and round the hubs are working and you will have drive to the front axle in 4wd if the transfer box is working*
If you can turn it round and round then one of
One or both hubs aren't engaging
You have a broken CV joint
You have a snapped half shaft (usually the short one breaks before the long one)
The diff is broken, e.g the bolts holding the crownwheel have sheared
*if the front axle all checks out disengage the hubs and put it in 4wd. If you can turn the front prop round and round the transfer box isn't engaging 4wd.
If you can't turn it round and round the hubs are working and you will have drive to the front axle in 4wd if the transfer box is working*
If you can turn it round and round then one of
One or both hubs aren't engaging
You have a broken CV joint
You have a snapped half shaft (usually the short one breaks before the long one)
The diff is broken, e.g the bolts holding the crownwheel have sheared
*if the front axle all checks out disengage the hubs and put it in 4wd. If you can turn the front prop round and round the transfer box isn't engaging 4wd.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.120 seconds