A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Shifter Sheet?
- leeds83
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
01 Nov 2017 10:32 #185707
by leeds83
Shifter Sheet? was created by leeds83
Following on from another post I've got on here, my shifter is very very loose having now put it back together and won't go into 1st. I might have lost this out when removing or it was already perished.
Having done some research on here, seems the problem might be the plastic bush from the bottom of the transfer box.
Does anyone know where I can get one? Really struggling to find a replacement!
It's the very last stage of fixing my Jimny up.
Having done some research on here, seems the problem might be the plastic bush from the bottom of the transfer box.
Does anyone know where I can get one? Really struggling to find a replacement!
It's the very last stage of fixing my Jimny up.
Please Log in or Create an account to join the conversation.
01 Nov 2017 11:02 #185709
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Shifter Sheet?
Which box are you referring to? Transfer box or Gearbox. you talk about "1st Gear" but also talk about Transfer box
The "shifter sheet" and related issues are really focussed on the SJ series of vehicles.
There are components in the jimny remote set up which are similar. Need a bit more detail to be honest
The "shifter sheet" and related issues are really focussed on the SJ series of vehicles.
There are components in the jimny remote set up which are similar. Need a bit more detail to be honest
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- leeds83
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
01 Nov 2017 11:45 #185711
by leeds83
Replied by leeds83 on topic Shifter Sheet?
Sorry, i'm referring to the gear box.
Basically the gear shifter is wobbling all over the place after putting it back in. A few articles I read seemed to refer to this lower bush.
2003 jimny
Basically the gear shifter is wobbling all over the place after putting it back in. A few articles I read seemed to refer to this lower bush.
2003 jimny
Please Log in or Create an account to join the conversation.
- leeds83
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
02 Nov 2017 09:01 #185741
by leeds83
Replied by leeds83 on topic Shifter Sheet
I think it's number 20 on the diagram below.
Please Log in or Create an account to join the conversation.
- leeds83
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
02 Nov 2017 09:45 #185743
by leeds83
Replied by leeds83 on topic Shifter Sheet?
OK
Problem solved, found the part number 2555160A02 see below
This is the missing bush that must have dropped out at some point, Suzuki in Leeds have one in stock £4.99.
Problem solved, found the part number 2555160A02 see below
This is the missing bush that must have dropped out at some point, Suzuki in Leeds have one in stock £4.99.
Please Log in or Create an account to join the conversation.
Time to create page: 2.923 seconds