A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Jimnybits axle truss
- Muddyzook94
- Topic Author
- New Member
-
Public
06 Jun 2017 22:08 #181805
by Muddyzook94
Jimnybits axle truss was created by Muddyzook94
Which one is the front and back ?
Please Log in or Create an account to join the conversation.
07 Jun 2017 07:05 #181810
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Jimnybits axle truss
The cut out is for the same case breather. If you look at both axles it will make sense. They go on top of the axle
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
Time to create page: 2.201 seconds