A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
moving to upper lights
- jackonlyjack
-
Topic Author
- Offline
- Platinum Member
-
Registered
24 Sep 2016 17:52 #172792
by jackonlyjack
moving to upper lights was created by jackonlyjack
modified a set of rear lights to put brake and indicators in upper position
started by cutting bulb mounts off
wrapping tape to fit the recess
then cut hole a 25mm step cutter would work fine
started by cutting bulb mounts off
wrapping tape to fit the recess
then cut hole a 25mm step cutter would work fine
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
Topic Author
- Offline
- Platinum Member
-
Registered
24 Sep 2016 18:06 #172794
by jackonlyjack
Replied by jackonlyjack on topic moving to upper lights
sanded it flat
glued in place then sealed with silicone
glued in place then sealed with silicone
Please Log in or Create an account to join the conversation.
Time to create page: 0.627 seconds