Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Shima's little gold project
- Shima
- Topic Author
- New Member
-
Public
30 Jun 2013 18:16 #75583
by Shima
Replied by Shima on topic Shima's little gold project
No eBay APP ID and/or Cert ID defined in Kunena configurationThis is the one i got 
Just remember to rough up the paint so it has a surface to stick on
Just remember to rough up the paint so it has a surface to stick on
Please Log in or Create an account to join the conversation.
- whizz3006
- New Member
-
Public
- Shima
- Topic Author
- New Member
-
Public
30 Jun 2013 22:27 #75626
by Shima
Replied by Shima on topic Shima's little gold project
It's the Nato Green and the Matt
I got the 2.5 liter tin and only used 3 quarters of it. That was 3 coats of the stuff.
I got the 2.5 liter tin and only used 3 quarters of it. That was 3 coats of the stuff.
Please Log in or Create an account to join the conversation.
- Shima
- Topic Author
- New Member
-
Public
03 Jul 2013 22:04 #76022
by Shima
Replied by Shima on topic Shima's little gold project
Got some of the lift on. Still need to put the Panhard rods on and the Radius arms but getting there Slowly.
Once the suspension is all done it will be time for the cutting of the arches and some nice big rubber
Slowly.
Once the suspension is all done it will be time for the cutting of the arches and some nice big rubber
Please Log in or Create an account to join the conversation.
- helijohn
- New Member
-
Public
05 Jul 2013 22:10 #76244
by helijohn
I'm with you there pal.
Replied by helijohn on topic Re:Shima's little gold project
UKDAN wrote: Looks good in green but I still think gold is the best cover
Dan
I'm with you there pal.
Please Log in or Create an account to join the conversation.
- whizz3006
- New Member
-
Public
06 Jul 2013 17:19 #76295
by whizz3006
Replied by whizz3006 on topic Shima's little gold project
Looking good Shima!
Oh what I'd give to have access to a workshop like that!
Oh what I'd give to have access to a workshop like that!
Please Log in or Create an account to join the conversation.
Time to create page: 0.162 seconds