×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Goniu's jimny from Poland

More
13 Apr 2012 19:19 #37460 by j999pre
Replied by j999pre on topic Re: Goniu jimny from Poland

Goniu wrote:

j999pre wrote: Good looking jimny, hows the gearing with 31" and the auto t-box?

Welcome.

I hope, You understand me correctly. I have mounted auto t-box (button version - after 2005 year) from Jimny with automatic gearbox to my Jimny with manual gearbox. The different is about 33% lower ratio.
In terrain it's perfect very slowly and powerfull. On normal ride "on black" good acceleration :D but max speed... ;) for compare real speed is about 80km/h with 3100 rpm


Thanks that answered my question nicely. Could be a cheap way of correcting gearing for larger tyres. Who needs top speed! :P

Gold Jimny the best colour (sold) :(

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

More
13 Apr 2012 19:22 #37461 by j999pre
Replied by j999pre on topic Re: Goniu jimny from Poland
Scratch that. It won't work on my non vvt as the high ratio is the same. Would help in low though.

Gold Jimny the best colour (sold) :(

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

  • Goniu
  • Topic Author
  • Visitor
  • Visitor
    Public
13 Apr 2012 19:52 #37464 by Goniu
Replied by Goniu on topic Re: Goniu jimny from Poland
Sorry, but I don't know the gear ratio in non vvt gearbox so i can't help, but if you have some informations, write pleas and I'll try to tell if will be differences

Please Log in or Create an account to join the conversation.

  • Black Toy
  • Visitor
  • Visitor
    Public
19 Jun 2012 06:09 #42554 by Black Toy
Replied by Black Toy on topic Re: Goniu jimny from Poland
Please post a picture so i can have the idea of where and how much you have trimmed arches fenders

Thanks a lot

Please Log in or Create an account to join the conversation.

  • Goniu
  • Topic Author
  • Visitor
  • Visitor
    Public
19 Jun 2012 07:07 #42556 by Goniu
Replied by Goniu on topic Re: Goniu jimny from Poland

Please post a picture so i can have the idea of where and how much you have trimmed arches fenders


OK, but until evening, when i'll be back in home
Regards

Please Log in or Create an account to join the conversation.

  • Black Toy
  • Visitor
  • Visitor
    Public
19 Jun 2012 12:17 #42566 by Black Toy
Replied by Black Toy on topic Re: Goniu jimny from Poland
appreciate dude, will be doing mine this week

Please Log in or Create an account to join the conversation.

  • Goniu
  • Topic Author
  • Visitor
  • Visitor
    Public
20 Jun 2012 21:24 #42674 by Goniu
Replied by Goniu on topic Re: Goniu jimny from Poland

That is first step in triming, only to fit big tire size 31"

In #1 i suggest to cut very precise and gently sharp metal piece, that's hidden under plastic wheel arch, and paint it. As You see there is quite big hole, there collects lot of mud. In next step i'll make small mudguards to cover that hole in front and rear wheel arches.

Rear wheel


Here i suggest to first remove wheel, next cut plastic on the yellow line, and cut metal support on the orange line. First attached picture shows you how deep cut is in rear wheel arches.
I hope that useful for you.
Attachments:

Please Log in or Create an account to join the conversation.

  • Black Toy
  • Visitor
  • Visitor
    Public
20 Jun 2012 21:30 #42677 by Black Toy
Replied by Black Toy on topic Re: Goniu jimny from Poland
thanks a lot!

mine are a little smaller tyres (235s) and rub more on the inside so far... did some tests and will put a 2" body lift tomorrow and see how it goes...

Please Log in or Create an account to join the conversation.

  • Goniu
  • Topic Author
  • Visitor
  • Visitor
    Public
21 Jun 2012 04:41 - 21 Jun 2012 04:44 #42683 by Goniu
Replied by Goniu on topic Re: Goniu jimny from Poland

Black Toy wrote: thanks a lot!

mine are a little smaller tyres (235s) and rub more on the inside so far... did some tests and will put a 2" body lift tomorrow and see how it goes...


I think that Jimmny have lot of space inside for wheel, you have original rims? Maybe you have rims with positive offset (+ET)? I think, after 2" lift 235s tires will have enough space without trimming
Last edit: 21 Jun 2012 04:44 by Goniu.

Please Log in or Create an account to join the conversation.

  • ilten
  • Visitor
  • Visitor
    Public
24 Jun 2012 14:00 #42825 by ilten
Replied by ilten on topic Re: Goniu jimny from Poland
Wow. That's a real nice Jimny. I fitted 30x9.5 BFG MT last week and had to do some serious fender trimming, as I just have a 2" trailmaster lift....
If I ever make it to Poland I'd like to go for a ride :cheer:
ilten

Please Log in or Create an account to join the conversation.

  • Goniu
  • Topic Author
  • Visitor
  • Visitor
    Public
24 Jun 2012 14:59 #42827 by Goniu
Replied by Goniu on topic Re: Goniu jimny from Poland
Thanks!
I hope that if someone and his Jimny ever plan to visit or cross the Poland, will plan to meet with me and take a ride together. So feel free to be my guest

Please Log in or Create an account to join the conversation.

  • Goniu
  • Topic Author
  • Visitor
  • Visitor
    Public
20 Jun 2014 22:03 #118268 by Goniu
Replied by Goniu on topic Goniu jimny from Poland
So we spend my 30th birthday on sandy off roads :) trying to fell a tree using a front bumper.. plastic bumper :evil:

Please Log in or Create an account to join the conversation.

Time to create page: 0.129 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.