Rusty body mount

Hi
On my newly acquired toy 
I just discovered some annoying squeaking in my 2003 jimny 
after investigating the body mount right rear seem to be rusted pretty bad.
what are the best repair options, are there some ready made panels for this ?
chassis looks ok but rear body is pretty rusty.

That all looks fairly badly corroded. I would imagine it will need dismantling and repair patches made where necessary.

Hi,

I had the same problem and bought these parts from Jimnybits:

www.jimnybits.com/62130-81aa4-genuine-fl...inr-98-18-no-15.html
www.jimnybits.com/62211-81a00-genuine-ex...-rh-98-18-no-19.html
www.jimnybits.com/62311-81a00-genuine-ex...-lh-98-18-no-20.html
www.jimnybits.com/62511-81a01-genuine-fl...ter-98-18-no-21.html
www.jimnybits.com/62141-81a00-genuine-br...ket-98-18-no-16.html

I also got 2 new rear body mount rubbers as the original ones had a metal plate on top that was corroded away:
www.jimnybits.com/genuine-cushion-body-m...ody-bushes-no-3.html


It wasn't too difficult when I figured out how to weld The worst in my opinion was to find and drill / grind out the spotwelds.
Then when you first start to do something like this you will probably find some more rust.

Here you can read about my struggles:
www.bigjimny.com/index.php/forum/7-jimny...-through-body-mounts

good luck!

Thanks TrondK
Awesome to see your thread about this.
I suspect i will use this to learn a bit about welding aswell.
Great to get links to all these ready made parts for this.

l didn't realise there were so many ready made repair patches available for the Jimny!

How's the other side, is it in a better state? Time to get some rust proofing products on the underside once you've repaired it.