×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
New to jimnys but got some faults
- mouzer309
- Topic Author
- Visitor
-
Public
11 Oct 2020 18:05 #229033
by mouzer309
New to jimnys but got some faults was created by mouzer309
evening folks i bought a jimny last week and havent had much luck so far but my issue is that i cannot find much threads on the issues im having. so basically i have a 2002 jimny and sometimes when i use the transfer box it will go into 4h and 4l but othertimes it will reject it does anyone have any ideas thanks
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2911
- Thank you received: 653
- Points: 8466.00
11 Oct 2020 18:13 #229034
by jackonlyjack
Replied by jackonlyjack on topic New to jimnys but got some faults
Have you checked
3 mounting rubber bobbins are ok
Have the cast alloy mountings corroded and broke
Does the truck have a body lift fitted this can stop you getting 4 low
3 mounting rubber bobbins are ok
Have the cast alloy mountings corroded and broke
Does the truck have a body lift fitted this can stop you getting 4 low
Please Log in or Create an account to join the conversation.
- mouzer309
- Topic Author
- Visitor
-
Public
12 Oct 2020 09:27 #229046
by mouzer309
Replied by mouzer309 on topic New to jimnys but got some faults
Hi jack
It’s completely standard
But unfortunately I’ve not had chance to check this yet will do
It’s completely standard
But unfortunately I’ve not had chance to check this yet will do
Please Log in or Create an account to join the conversation.
- mouzer309
- Topic Author
- Visitor
-
Public
14 Oct 2020 09:34 #229120
by mouzer309
Replied by mouzer309 on topic New to jimnys but got some faults
Hi jack
Okay tried the jimny
It’s going in 2low fine when I’m selecting 4 low it’s sometimes going in and the light flashes then goes solid but then other times the light is just flashing and it’s not locking in 4 low any ideas
Okay tried the jimny
It’s going in 2low fine when I’m selecting 4 low it’s sometimes going in and the light flashes then goes solid but then other times the light is just flashing and it’s not locking in 4 low any ideas
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2911
- Thank you received: 653
- Points: 8466.00
14 Oct 2020 10:10 #229121
by jackonlyjack
Replied by jackonlyjack on topic New to jimnys but got some faults
2 low have you got a switch in to trick the 4wd system ?
So 4 high is working fine (first position when lever pulled back) ?
If you're having problems going into 4 low only...
...are you pushing down on the lever when selecting low range ?
If still failing remove knob (pz2 screw on the back) then remove the gator and plate (4 screws possibly under carpet)
put knob back on and try without gator and plate
lever should not touch car body when in low position
So 4 high is working fine (first position when lever pulled back) ?
If you're having problems going into 4 low only...
...are you pushing down on the lever when selecting low range ?
If still failing remove knob (pz2 screw on the back) then remove the gator and plate (4 screws possibly under carpet)
put knob back on and try without gator and plate
lever should not touch car body when in low position
Please Log in or Create an account to join the conversation.
Time to create page: 0.087 seconds