×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Re:Driveshaft alloy spacer
Less
More
- Posts: 48
- Thank you received: 2
- Points: 195.00
13 Nov 2019 08:14 #215586
by giacomom
Driveshaft alloy spacer was created by giacomom
Hi all,
I have a doubt
a to fit a + 60/70 mm lift kit I would like to know where the driveshaft alloy spacer is mounted :
front or rear and transfer or axle side ?
thank you
Giacomo
I have a doubt
a to fit a + 60/70 mm lift kit I would like to know where the driveshaft alloy spacer is mounted :
front or rear and transfer or axle side ?
thank you
Giacomo
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 48
- Thank you received: 2
- Points: 195.00
15 Nov 2019 06:17 #215641
by giacomom
Replied by giacomom on topic Driveshaft alloy spacer
Hi,
41 views and no answers......
Is it a too technical request ?
thank you
Giacomo
41 views and no answers......
Is it a too technical request ?
thank you
Giacomo
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1936
- Thank you received: 554
- Points: 7523.00
15 Nov 2019 07:23 #215642
by Riccy
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic Re:Driveshaft alloy spacer
It’s not too technical, rather too specific.
A kit you have bought should come with some instructions or support from the seller, however that doesn’t seem to be the case.
I use a small spacer on the intermediate prop, but this is to do with the rock lobster transfer box.
Prop spacers for front/rear props would always go at the transfer box end, but they are not the best solution. Generally you will end up changing to some HD props eventually as the UJs on standard props are not designed to run at such high angles.
Sent from my iPhone using Tapatalk
A kit you have bought should come with some instructions or support from the seller, however that doesn’t seem to be the case.
I use a small spacer on the intermediate prop, but this is to do with the rock lobster transfer box.
Prop spacers for front/rear props would always go at the transfer box end, but they are not the best solution. Generally you will end up changing to some HD props eventually as the UJs on standard props are not designed to run at such high angles.
Sent from my iPhone using Tapatalk
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 48
- Thank you received: 2
- Points: 195.00
15 Nov 2019 07:45 #215643
by giacomom
Replied by giacomom on topic Re:Driveshaft alloy spacer
Hi Riccy and thank you for answer
the kit has no assembly instructions but the seller has informed me that the spacer must be to fit front driveshaft axle side ...... why ?
" Prop spacers for front/rear props would always go at the transfer box end, "
so what do i do ?
Giacomo
the kit has no assembly instructions but the seller has informed me that the spacer must be to fit front driveshaft axle side ...... why ?
" Prop spacers for front/rear props would always go at the transfer box end, "
so what do i do ?
Giacomo
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1936
- Thank you received: 554
- Points: 7523.00
15 Nov 2019 10:51 #215652
by Riccy
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic Driveshaft alloy spacer
Try it and see. If you notice the UJs on prop binding up then swap it around.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2912
- Thank you received: 653
- Points: 8471.00
15 Nov 2019 23:33 #215678
by jackonlyjack
Replied by jackonlyjack on topic Driveshaft alloy spacer
I'm with Riccy transfer box end on a gen3
If you have a gen4 it may need to fit at diff end
If you have a gen4 it may need to fit at diff end
Please Log in or Create an account to join the conversation.
Time to create page: 0.114 seconds