BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Re:Weird grind\rattle taking off in 1st gear 2019 Jimny

  • ITAYKOREN76
  • New Member
  • New Member
    Public
More
10 May 2021 08:08 #234944 by ITAYKOREN76
Replied by ITAYKOREN76 on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
:(
is it automatic ?

Please Log in or Create an account to join the conversation.

More
10 May 2021 09:31 #234945 by Soeley
Replied by Soeley on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
As far as I know, it's only the Manual that is affected? Someone else might be able to confirm though?
Black 2019 Jimny SZ5

www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5

[IMG

Please Log in or Create an account to join the conversation.

  • coellobranco
  • New Member
  • New Member
    Public
More
10 May 2021 12:37 #234946 by coellobranco
Replied by coellobranco on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
Manual...

watch this video:

Please Log in or Create an account to join the conversation.

More
10 May 2021 14:53 #234948 by lightning
Replied by lightning on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
Our 2020 Jimny is a manual and never had any untoward noises from the transmission.

Please Log in or Create an account to join the conversation.

More
12 May 2021 12:51 #234996 by fordem
Replied by fordem on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
Our 2021 is manual and has the noise.

Please Log in or Create an account to join the conversation.

  • elliotAs
  • New Member
  • New Member
    Public
More
21 Jul 2021 02:47 #236842 by elliotAs
Replied by elliotAs on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
I have a 2021 model with same noise. Found this below on the German forum. I will mention it on my 1000km check.

"The Service Bulletin Q-AG6-004 of May 22nd, 2019 describes the " Optional spare parts information to reduce the noise from the transfer case when starting up ": Problem Description:When starting off in 1st gear, noises can be heard from the transfer case at approx. 2,000 rpm due to vibrations in the drive chain. Remedial measures:An optional spare parts set has been introduced to reduce noise from the VTG by optimizing friction and damping vibrations in the drive chain. ET information:Drive Chains - Set # 29200-78R00 29951-83050 flange nut (2)29941-77R00 screw retaining spring (2)29946-80051 oil drain plug (1)29945-80051 oil filler plug (1) 09106-06139 Screw, gear lever knob (1)09117-08079 PTO shaft screw (1)"

Please Log in or Create an account to join the conversation.

Time to create page: 0.188 seconds
Joomla template by a4joomla