×
Search (23 Feb 2018)

A trial enhanced search facility has been enabled. Please use the Google Custom Search above.

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

2 x Single DIN - does it fit

More
26 Nov 2018 15:27 #198177 by mlines
In the pre 2005 jimny, the one with a single DIN radio and a clock/pocket. Can another DIN radio fit where the clock/pocket fits?

i.e. 2 x 1 DIN - not double DIN


Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
26 Nov 2018 16:39 #198180 by jackonlyjack
Has a straight fit NO




Where. my finger is pointing the rib will need removing to allow it to slide all the way in and it's not quite single din size
But you can fit anything if you try hard enough
May require some cutting and removal of ash tray
Attachments:
The following user(s) said Thank You: mlines

Please Log in or Create an account to join the conversation.

More
26 Nov 2018 16:45 #198181 by mlines
Replied by mlines on topic 2 x Single DIN - does it fit
Thanks

I was wondering about fitting this DIN CB radio there. It goes narrow at the rear.


Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Attachments:

Please Log in or Create an account to join the conversation.

More
26 Nov 2018 16:52 #198182 by jackonlyjack
If you reduce the height of the plastic surround
it would be possible i'm sure ;)
Would you like me to post the one i have out to you ?
cost....just make a donation to the forum on my behalf ;)
save wrecking yours lol
Jack

Please Log in or Create an account to join the conversation.

More
27 Nov 2018 11:04 #198225 by mlines
Replied by mlines on topic 2 x Single DIN - does it fit
Many thanks

I will sort a donation.

Do you need an address to send it to? There is no hurry as the radio was a Cyber Monday purchase for christmas so will not be installed until the new year

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
27 Nov 2018 18:27 #198244 by jackonlyjack

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.110 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.