×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Would these fit on a jim
- Chris the Phys
- Topic Author
- Visitor
-
Public
10 Mar 2013 15:25 #65155
by Chris the Phys
Would these fit on a jim was created by Chris the Phys
Please Log in or Create an account to join the conversation.
- markyp2000
- Visitor
-
Public
10 Mar 2013 16:27 #65169
by markyp2000
Replied by markyp2000 on topic Would these fit on a jim
Depends what the boar size is the pcd and the offset
Please Log in or Create an account to join the conversation.
- Chris the Phys
- Topic Author
- Visitor
-
Public
10 Mar 2013 19:13 #65210
by Chris the Phys
What does PCD mean and how do I find out the offset?

Cheers
Replied by Chris the Phys on topic Would these fit on a jim
Depends what the boar size is the pcd and the offset
What does PCD mean and how do I find out the offset?


Cheers
Please Log in or Create an account to join the conversation.
- reaper
- Visitor
-
Public
10 Mar 2013 19:25 #65211
by reaper
Replied by reaper on topic Would these fit on a jim
Pitch Circle Diameter
Its the distance and spacing of the bolt holes a jimny is 5x139.7
You also need to know the tyre size
Its the distance and spacing of the bolt holes a jimny is 5x139.7
You also need to know the tyre size
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 2313
- Thank you received: 360
- Points: 93.00
10 Mar 2013 19:40 #65214
by Halford
Replied by Halford on topic Would these fit on a jim
Please Log in or Create an account to join the conversation.
- markyp2000
- Visitor
-
Public
10 Mar 2013 19:50 #65217
by markyp2000
What reaper said lol
Replied by markyp2000 on topic Would these fit on a jim
Depends what the boar size is the pcd and the offset
What does PCD mean and how do I find out the offset?![]()
Cheers
What reaper said lol
Please Log in or Create an account to join the conversation.
- little jimny
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 373
- Thank you received: 31
- Points: 0.00
10 Mar 2013 20:36 #65223
by little jimny
Replied by little jimny on topic Would these fit on a jim
they look like they'd stick out by miles, and you'd need to knock up some arch extensions to keep them legal.
Please Log in or Create an account to join the conversation.
- page
- Visitor
-
Public
10 Mar 2013 21:46 #65237
by page
Replied by page on topic Would these fit on a jim
They do stick out loads I have some on my jimny I will put a pic on tomorrow if it helps
Please Log in or Create an account to join the conversation.
- Chris the Phys
- Topic Author
- Visitor
-
Public
10 Mar 2013 21:55 #65240
by Chris the Phys
cool, so they could fit as they were fitted to a vit
what size tyres do u have?
yes pic would be gr8 too
Replied by Chris the Phys on topic Would these fit on a jim
They do stick out loads I have some on my jimny I will put a pic on tomorrow if it helps
cool, so they could fit as they were fitted to a vit
what size tyres do u have?
yes pic would be gr8 too
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 891
- Thank you received: 34
- Points: 0.00
15 Mar 2013 12:51 #65748
by ooky_123
Former owner of Little "Ooky", who has now started a new life in Shetland
Replied by ooky_123 on topic Would these fit on a jim
They look like Vitara Fat Boy alloys ... yes they will fit, but as has been said, youll need arche extensions and they may foul the bumpers unless you trim the lower edges
Former owner of Little "Ooky", who has now started a new life in Shetland
Please Log in or Create an account to join the conversation.
- panosd
- Visitor
-
Public
15 Mar 2013 13:46 #65759
by panosd
Replied by panosd on topic Would these fit on a jim
These wheels are from an sj410 which are procesed in workshop for bigger offset.
They will fit but not in stock jimny.
They are to wide.
They will fit but not in stock jimny.
They are to wide.
Please Log in or Create an account to join the conversation.
- Martin2287
- Visitor
-
Public
16 Mar 2013 20:22 - 16 Mar 2013 20:25 #65975
by Martin2287
Replied by Martin2287 on topic Would these fit on a jim
do this vitara wheels fit jimny? they are 6Jx15 H2 ET10 jimny is standard. wheels are from 1998 vitara
Last edit: 16 Mar 2013 20:25 by Martin2287.
Please Log in or Create an account to join the conversation.
Time to create page: 0.172 seconds