-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
Anti Roll Bar and Lift
×
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Anti Roll Bar and Lift
-
freak
-
Topic Author
-
Visitor
-
Public
06 Feb 2013 20:48 #61183
by freak
Please help a newbie here.
Can I keep the Anti Sway Bar with a 3.5" lift? I'm afraid to remove since the shocks are overly soft (long travel).
Thanks a lot guys
Please Log in or Create an account to join the conversation.
-
adamjimny
-
-
Visitor
-
Public
06 Feb 2013 21:16 #61193
by adamjimny
im not 100% but i think you can
question is why lift it gaing more axle travel then keep it stupidly limited?
Please Log in or Create an account to join the conversation.
-
Black Toy
-
-
Visitor
-
Public
06 Feb 2013 21:25 #61194
by Black Toy
Thanks,
Well, the Jimny is also a daily and due to shocks being soft as said above.
Does anyone have done this? Will it strain the joints too much?
Please Log in or Create an account to join the conversation.
-
TomDK
-
-
Visitor
-
Public
06 Feb 2013 21:28 #61197
by TomDK
adamjimny wrote: im not 100% but i think you can
question is why lift it gaing more axle travel then keep it stupidly limited?
Agreed, makes little sense.
But I'm pretty sure they bar fits with the lift.
Please Log in or Create an account to join the conversation.
-
markyp2000
-
-
Visitor
-
Public
06 Feb 2013 21:32 #61198
by markyp2000
Try it and you will be the firs to find out if it dont work make of buy anti roll bar links 3.5"longer simple
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 2185
-
Thank you received: 153
-
Points: 5.00
-
-
-
-
06 Feb 2013 21:33 #61199
by supergaz
The bar will fit, but the angle of the drop links will render the bar useless. You will need to extend the drop links or find longer.
Please Log in or Create an account to join the conversation.
-
Skinhead
-
-
Visitor
-
Public
06 Feb 2013 22:31 #61224
by Skinhead
Just take them off fella, they dont do much, well i didnt notice a difference anyway! Mine is my everyday vehicle
Please Log in or Create an account to join the conversation.
-
mudman
-
-
Visitor
-
Public
06 Feb 2013 23:41 #61247
by mudman
stop being a girl and take them off
you dont need them its a off roader not a racing car you dont need to corrner fast
Please Log in or Create an account to join the conversation.
-
panosd
-
-
Visitor
-
Public
07 Feb 2013 09:08 #61273
by panosd
If you dont won't to take it off, you can make spacers for the antiroll bar and install them to the chassis side
in order to lower her down.
With this the car will react as a stock one.
The spacer side is going to be about 3-4cm for your 3.5'' lift.
Please Log in or Create an account to join the conversation.
-
freak
-
Topic Author
-
Visitor
-
Public
07 Feb 2013 10:30 #61278
by freak
Thanks for the heap of opinions. I have alteady though about spacers to bring back the stock articulation of the bar. But after reading that, will definitly try with arb off first. Will get back here. Thanks again.
Please Log in or Create an account to join the conversation.
-
Paul4x4
-
-
Visitor
-
Public
07 Feb 2013 13:37 #61289
by Paul4x4
I have the AR bar still fitted on mine with 3" lift, and it works just fine. The reason I haven't taken it off, is because it limits the suspension in travel just enough so my 33's wont rub on the arches. And it doesn't even restrict the flex much, because I tested that with a forklift and could lift one wheel up for about 50cm, so that ain't bad for a short wheelbase truck with the AR bar on it!
Please Log in or Create an account to join the conversation.
-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
Anti Roll Bar and Lift
Time to create page: 0.105 seconds
