-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
Cv Joint
×
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Cv Joint
-
Gromit
-
Topic Author
-
Visitor
-
Public
30 Nov 2011 19:23 #26956
by Gromit
No eBay APP ID and/or Cert ID defined in Kunena configurationFinally discovered that a front end clicking noise is the CV joint on the passenger side and I'm looking at this on Ebay from Camsuzuki at Halifax.
I thought that these differed depending on the year, this one says 1998 to 2011, any advice would be welcome.
Please Log in or Create an account to join the conversation.
-
martysmith
-
-
Visitor
-
Public
30 Nov 2011 19:28 #26958
by martysmith
i dont think they have changed the axles over the years so i recon it will be fine
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 6256
-
Thank you received: 1454
-
Points: 14490.00
-
-
-
-
-
-
30 Nov 2011 19:31 #26961
by mlines
The spline counts have changed on the CV, not sure about the main shaft ends.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
-
Gromit
-
Topic Author
-
Visitor
-
Public
30 Nov 2011 19:33 #26963
by Gromit
mlines wrote: The spline counts have changed on the CV, not sure about the main shaft ends.
Martin
So by buying the whole thing it should fit my 2002 then ?
Please Log in or Create an account to join the conversation.
-
martysmith
-
-
Visitor
-
Public
30 Nov 2011 19:34 #26964
by martysmith
mlines wrote: The spline counts have changed on the CV, not sure about the main shaft ends.
Martin
thats handy to know cheers martin
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 6256
-
Thank you received: 1454
-
Points: 14490.00
-
-
-
-
-
-
30 Nov 2011 19:36 #26965
by mlines
Don't know - thats why I said "not sure"
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: Gromit
Please Log in or Create an account to join the conversation.
-
doncarlyon
-
-
Visitor
-
Public
30 Nov 2011 20:34 #26978
by doncarlyon
This is why i havent bothered looking at mine yet ha ha!
Please Log in or Create an account to join the conversation.
-
Cocopolo
-
-
Visitor
-
Public
01 Dec 2011 10:34 #27000
by Cocopolo
There are difference in the differential between jimny before and after 2003 (earlier has 8 bolt crown wheel, latest has 10 bolts)
Then, there are differences between cv joint of japan made and spain made jimny: spain ones has 20spline in the cv on diff-side, while japans has 19 spline
Spains has also a different pinion and differed 3rd member housing
Cheers
Please Log in or Create an account to join the conversation.
-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
Cv Joint
Time to create page: 0.096 seconds
