× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

Exhaust Manifold Bolt Replacement

  • Lambert
  • Lambert's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • The quickest Jimny in Harrogate...(that I own)
05 Jun 2023 03:23 #249424 by Lambert
If you send Martin in the bigjimny shop in the top banner a message with your vehicle details he will be able to quote you.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Defect Ooooh Shiny!

Please Log in or Create an account to join the conversation.

07 Jun 2023 18:20 #249454 by facade

The bolt size was "7/16-20 UNF" for anyone looking in future

Crikey, UNF threads on a Japanese car!

I'd have expected 10x1.25, the Japanese always use fine threads into alloy. They tend to use reduced head sizes too, so you need those spanners that are always missing from the short sets (11mm, 15mm, 16mm & 18mm)

If it suddenly breaks, go back to the last thing that you did before it broke and start looking there :)

Please Log in or Create an account to join the conversation.

Time to create page: 0.117 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.