× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.[/size][/color][/b]

ARB Bullbar

More
12 May 2020 19:11 #222176 by Lasse
ARB Bullbar was created by Lasse
Hey guys
Do anyone know if it possible to fit an ARB bullbar from a gen 3 to a gen 4 with some mods ..? Or is it impossible?

Thanks guys..!

Please Log in or Create an account to join the conversation.

More
13 May 2020 07:02 #222189 by Lasse
Replied by Lasse on topic ARB Bullbar
Here are some pictures..!
Attachments:

Please Log in or Create an account to join the conversation.

More
13 May 2020 09:23 #222191 by Scimike
Replied by Scimike on topic ARB Bullbar
Hi Laser,

You may need to find someone who has actually done this to understand fully the amount of work required (or lack of). Not seen that many Jimnys with bull bars in the UK, so it may be a long wait.

The answer to your question is yes it can be made to fit, anything can be made to fit. If you have a welder, grinder and some steel and are prepared to chop it up you can do it, but it's difficult to say how much work / cutting etc it will require.
I've just chopped up a motorcycle rack and made it fit "the wrong bike", but it was worth the effort as you can no longer purchase racks to fit.

Good luck
Mike

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
13 May 2020 09:51 #222194 by Lambert
Replied by Lambert on topic ARB Bullbar
As above, if you are fairly comfortable driving a welder and a grinder then anything is possible if you have the time and inclination.

Dreadnaught (black 2011)

Please Log in or Create an account to join the conversation.

More
13 May 2020 09:52 #222195 by Lasse
Replied by Lasse on topic ARB Bullbar
Yeah ok maybe it is too much work..!

But a new one in Denmark is just super expensive..! Hmm damn

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
13 May 2020 10:41 #222197 by Lambert
Replied by Lambert on topic ARB Bullbar
Does your old one not have some second hand value to offset the cost of a new one?

Dreadnaught (black 2011)

Please Log in or Create an account to join the conversation.

More
13 May 2020 18:32 #222208 by Lasse
Replied by Lasse on topic ARB Bullbar
Nope I am a fairly new Jimny owner soo I just looking on the internet to find some nice front bumper/ bullbar to fit on my new Jungel green Jimny..! Also looking for a winch..!

Hmm but are the gen 3 and 4 the same size give an take?

Please Log in or Create an account to join the conversation.

Time to create page: 0.073 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.