×
Search (23 Feb 2018)

A trial enhanced search facility has been enabled. Please use the Google Custom Search above.

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.[/size][/color][/b]

Engine Mount - Rear (Gearbox mount)

More
02 Dec 2018 16:05 #198539 by Martinw
While the Jimny was in getting a new clutch I was told that the Gearbox mount was in a sorry state and ideally could do with replacing.

I've seen there are 2 types. Type 1 and Type 2. I've crawled underneath to have a look but cant quite tell which one I need. Is there any other way of knowing which one I need? vehicle year etc?

www.bigjimny.com/store/rear-engine-mount-gearbox-mount.html

Please Log in or Create an account to join the conversation.

More
02 Dec 2018 16:13 #198540 by Delux
I had to change one on my last Jimny.

The only difference I could see was one has the nuts attached and the other didnt.
I figured if I bought the one with the nuts attached the worst thing that would happen would be having to live with 2 extra nuts!







(Stop sniggering at the back!)

***DOES ANYONE HAVE A SILVER REAR BUMPER THEY CAN SELL ME?***

My current project is HERE!
The following user(s) said Thank You: Martinw

Please Log in or Create an account to join the conversation.

More
02 Dec 2018 16:19 #198542 by Martinw
Ah so it's just as simple as that? No Jedi trickery involved.

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.073 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.