×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Things to look out for when buying
- Alex09gp
- Topic Author
- Visitor
-
Public
08 Feb 2013 13:51 #61459
by Alex09gp
Things to look out for when buying was created by Alex09gp
Going to look at a 51 plate jimny tomorrow that has 75000 on the clock. Just looking for abit of advice on things to look out for and things that are definite no go? All the help is appreciated!!
Please Log in or Create an account to join the conversation.
- JivingDaddy
- Visitor
-
Public
08 Feb 2013 14:50 #61461
by JivingDaddy
Replied by JivingDaddy on topic Things to look out for when buying
There are members on this site that are far, far more knowledgeable than me (not difficult it's true). But I do strongly recommend that you slowly (is there any other way?!) take it up to 60mph and check for nasty wheel wobble. You won't miss it if the "Death Wobble" kicks in. If it does, could be Kingpin bearings and that is neither particularly nor easy (well, not for me). Could be just wheel balancing, but you need to check for DW.
Good luck. My wife's had hers 2 weeks now and she's totally fallen for it. You just can't help smiling when you're driving it.
Good luck. My wife's had hers 2 weeks now and she's totally fallen for it. You just can't help smiling when you're driving it.
Please Log in or Create an account to join the conversation.
08 Feb 2013 15:25 #61465
by kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Replied by kirkynut on topic Things to look out for when buying
RUST, RUST and er RUST!
In the boot under the carpet and jack etc, behind the head lamps, under the rear seats and where the sills meet the floorpan under the car are the worst placed to my knowledge of the shell.
Chassis seem to not be too bad.
Check also the axle mountings where their brackets are welded to the axle - there have been a couple on here where it's rusted and broke free. It's not an epedemic or anything, but I like my axle to stay attached to my car!
Single cam engines seem to suffer more withhead gasket failure at high mileage than twin cam but I don't think either are immune to it.
Are you a DIY mechanic or would youhave to take it to a garage for any work???
Kirkynut
In the boot under the carpet and jack etc, behind the head lamps, under the rear seats and where the sills meet the floorpan under the car are the worst placed to my knowledge of the shell.
Chassis seem to not be too bad.
Check also the axle mountings where their brackets are welded to the axle - there have been a couple on here where it's rusted and broke free. It's not an epedemic or anything, but I like my axle to stay attached to my car!
Single cam engines seem to suffer more withhead gasket failure at high mileage than twin cam but I don't think either are immune to it.
Are you a DIY mechanic or would youhave to take it to a garage for any work???
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 2318
- Thank you received: 360
- Points: 128.00
08 Feb 2013 15:26 - 08 Feb 2013 17:07 #61466
by Halford
Replied by Halford on topic Things to look out for when buying
Last edit: 08 Feb 2013 17:07 by Halford.
Please Log in or Create an account to join the conversation.
- Alex09gp
- Topic Author
- Visitor
-
Public
08 Feb 2013 17:02 #61488
by Alex09gp
Replied by Alex09gp on topic Things to look out for when buying
Nope not a mechanic can do some bits though, otherwise it will have to go to a garage. Thanks for all the advice so far though.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 2318
- Thank you received: 360
- Points: 128.00
08 Feb 2013 17:07 #61489
by Halford
Replied by Halford on topic Things to look out for when buying
the above link now works
Please Log in or Create an account to join the conversation.
- little jimny
- Visitor
-
Public
08 Feb 2013 18:06 #61492
by little jimny
Replied by little jimny on topic Things to look out for when buying
As well as looking out for rust and checking for the 'death wobble', check that the 4WD works as it should. Also, with the car stationary put it on full lock either side and check to see if the swivel joints are dry.
Please Log in or Create an account to join the conversation.
- JivingDaddy
- Visitor
-
Public
08 Feb 2013 19:43 #61524
by JivingDaddy
Replied by JivingDaddy on topic Things to look out for when buying
Check the stereo works nice and loud so that you don't have to listen to your passengers screaming in abject terror when you go off road.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 2318
- Thank you received: 360
- Points: 128.00
08 Feb 2013 19:50 #61528
by Halford
Replied by Halford on topic Things to look out for when buying
yeh, it's like ..........
when I die, I wanrt to go peacefully in my sleep like my Grandad,
not screaming like his passengers
when I die, I wanrt to go peacefully in my sleep like my Grandad,
not screaming like his passengers
Please Log in or Create an account to join the conversation.
- Dave cc
- Visitor
-
Public
08 Feb 2013 19:53 #61530
by Dave cc
Replied by Dave cc on topic Things to look out for when buying
Dont worry about rust in the rear floor as its just the best excuse toTray back it
Please Log in or Create an account to join the conversation.
- Dave cc
- Visitor
-
Public
08 Feb 2013 19:56 #61534
by Dave cc
Replied by Dave cc on topic Things to look out for when buying
Sod that halford im leaving this world the way i came in screaming and covered in blood thats why i still ride fast bikes
Please Log in or Create an account to join the conversation.
Time to create page: 0.133 seconds