×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
It's not looking good for my wallet and my Jim :(
- Standing
- Topic Author
- Visitor
-
Public
19 Nov 2012 18:40 - 19 Nov 2012 18:42 #53662
by Standing
It's not looking good for my wallet and my Jim :( was created by Standing
After inspecting the rear brakes on my jimny I was looking underneath and I found out the rear panhard rod is bent and all the bushes are knackered here is the pic of the damage
So I have ordered a second hand panhard rod and radius arm with good bushes
I have also got a bit of welding to do before I put it through a mot. Then it's fingers crossed
This very cheap car I got is turning out to be a nightmare
So I have ordered a second hand panhard rod and radius arm with good bushes
I have also got a bit of welding to do before I put it through a mot. Then it's fingers crossed
This very cheap car I got is turning out to be a nightmare
Last edit: 19 Nov 2012 18:42 by Standing.
Please Log in or Create an account to join the conversation.
- Standing
- Topic Author
- Visitor
-
Public
19 Nov 2012 18:43 #53663
by Standing
Replied by Standing on topic It's not looking good for my wallet and my Jim :(
Sorry the picture didn't work
Please Log in or Create an account to join the conversation.
- Standing
- Topic Author
- Visitor
-
Public
19 Nov 2012 18:44 #53665
by Standing
Replied by Standing on topic It's not looking good for my wallet and my Jim :(
Please Log in or Create an account to join the conversation.
- iloveics
- Visitor
-
Public
19 Nov 2012 19:06 #53667
by iloveics
Replied by iloveics on topic It's not looking good for my wallet and my Jim :(
ouch, how did you do that?
Please Log in or Create an account to join the conversation.
- Standing
- Topic Author
- Visitor
-
Public
19 Nov 2012 19:13 #53669
by Standing
Replied by Standing on topic It's not looking good for my wallet and my Jim :(
I didn't the owner before must of as it was a farm car and I said I wanted it to put back on the road and as it was a famliy friend he gave it to me
Please Log in or Create an account to join the conversation.
- reaper
- Visitor
-
Public
19 Nov 2012 19:23 #53672
by reaper
Replied by reaper on topic It's not looking good for my wallet and my Jim :(
Carnt complain then for a freebie
I guess it wasnt much for the second hand unit
I guess it wasnt much for the second hand unit
Please Log in or Create an account to join the conversation.
- adamatdraycott
- Visitor
-
Public
19 Nov 2012 19:56 #53679
by adamatdraycott
Replied by adamatdraycott on topic It's not looking good for my wallet and my Jim :(
Looks to me as though you could do with jet washing the underside of you Jim
Please Log in or Create an account to join the conversation.
- mudman
- Visitor
-
Public
19 Nov 2012 20:00 #53681
by mudman
Replied by mudman on topic It's not looking good for my wallet and my Jim :(
you think yours is expensive iv just put new cv's and king pins just to find iv got to strip it all out agen to change to wheel bearings now
Please Log in or Create an account to join the conversation.
- markyp2000
- Visitor
-
Public
19 Nov 2012 20:02 - 19 Nov 2012 20:04 #53682
by markyp2000
Replied by markyp2000 on topic It's not looking good for my wallet and my Jim :(
no you dont just take the discs off and the free wheeling hub take off cir clip undo the hub nut thats it i have a socket if you need it
half hour per side
half hour per side
Last edit: 19 Nov 2012 20:04 by markyp2000.
Please Log in or Create an account to join the conversation.
- Standing
- Topic Author
- Visitor
-
Public
19 Nov 2012 20:08 #53683
by Standing
Replied by Standing on topic It's not looking good for my wallet and my Jim :(
No I can't really , it was £60 for the panhard rod and arms, it was a cat c (little shunt up the rear) a few years ago till he fixed it and put in back on the road, then he started using it on the farm, but apparently it still needs the vic test plus mot then i can get the log book back and tax it. I am going to take it to a car wash with my ramps before the mot and clean the underside,
Please Log in or Create an account to join the conversation.
- markyp2000
- Visitor
-
Public
19 Nov 2012 20:14 #53685
by markyp2000
Replied by markyp2000 on topic It's not looking good for my wallet and my Jim :(
i would refuse to test it like that theres nothing worse than having mud in ya eye
Please Log in or Create an account to join the conversation.
- Standing
- Topic Author
- Visitor
-
Public
19 Nov 2012 20:28 #53690
by Standing
Replied by Standing on topic It's not looking good for my wallet and my Jim :(
Yeah i know that's why I'm jet washing it before the mot then it will be clean and dry for my mate to test it, but before that I got to borrow a welder to fill some holes
Please Log in or Create an account to join the conversation.
Time to create page: 0.130 seconds