×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

tbox lever bending

  • suzuki jimny fella
  • Topic Author
  • Visitor
  • Visitor
    Public
19 Mar 2012 18:21 #35941 by suzuki jimny fella
tbox lever bending was created by suzuki jimny fella
any tips on where the bends go tips/pics thanks guys

Please Log in or Create an account to join the conversation.

  • Cider
  • Visitor
  • Visitor
    Public
19 Mar 2012 19:53 #35959 by Cider
Replied by Cider on topic Re: tbox lever bending
Might give you some idea

Please Log in or Create an account to join the conversation.

  • myers647
  • Visitor
  • Visitor
    Public
19 Mar 2012 21:39 #35994 by myers647
Replied by myers647 on topic Re: tbox lever bending
hi mate have you got a body lift.if so rather than bending the lever you can just put a small slit in the tunnel.this lets the lever go back that bit more.

Please Log in or Create an account to join the conversation.

  • vitara_mad
  • Visitor
  • Visitor
    Public
19 Mar 2012 22:37 #35999 by vitara_mad
Replied by vitara_mad on topic Re: tbox lever bending

myers647 wrote: hi mate have you got a body lift.if so rather than bending the lever you can just put a small slit in the tunnel.this lets the lever go back that bit more.


thats with a standard jimny box not a lobster box

Please Log in or Create an account to join the conversation.

  • suzuki jimny fella
  • Topic Author
  • Visitor
  • Visitor
    Public
20 Mar 2012 20:50 #36081 by suzuki jimny fella
Replied by suzuki jimny fella on topic Re: tbox lever bending
no body lift lol

Please Log in or Create an account to join the conversation.

  • jimny5
  • Visitor
  • Visitor
    Public
20 Mar 2012 22:19 #36092 by jimny5
Replied by jimny5 on topic Re: tbox lever bending
Simple trail and error.

Please Log in or Create an account to join the conversation.

  • Cider
  • Visitor
  • Visitor
    Public
21 Mar 2012 09:30 #36113 by Cider
Replied by Cider on topic Re: tbox lever bending
Hi
Start at the ball end straighten the first kink out,then bend the second bend to around 130 degree angle
then at this time the whole shaft will need to be rotated 90 degrees as in the top picture.
The next bend is about 90 degree angle,best test fit as you`ll need to put a slight bend to keep the stick away for your seat
hopefully you`ll won`t be to far from the mark
Cheers
Pete

Please Log in or Create an account to join the conversation.

More
08 Jul 2012 21:40 #43765 by j999pre
Replied by j999pre on topic Re: tbox lever bending
Hi was the lever in the picture above for a jimny with a body lift our not?

A really useful post thanks.

Gold Jimny the best colour (sold) :(

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

  • Cider
  • Visitor
  • Visitor
    Public
09 Jul 2012 20:36 #43843 by Cider
Replied by Cider on topic Re: tbox lever bending
same lever used before and after a 2 inch lift without any problems

Please Log in or Create an account to join the conversation.

  • Paul4x4
  • Visitor
  • Visitor
    Public
09 Jul 2012 20:46 #43845 by Paul4x4
Replied by Paul4x4 on topic Re: tbox lever bending
Anyone used a press to cold bend it? I'm not a huge fan of heating things up red hot, and play around with them, so I'm gonna try using a press, or then I just use the cut and weld method....

Please Log in or Create an account to join the conversation.

More
10 Jul 2012 19:40 #43905 by j999pre
Replied by j999pre on topic Re: tbox lever bending
A friend and I did mine today. We decided that the lever is fairly soft and proved this by straightening it out in a large vice quite easily.

Then we bent it using oxy to something like the picture in this thread and tinkered with it from there.

Its all done now and the standard jimny gaiter fits a treat.

Couldn't be happier.

I just need to give it an outing now and try the low range.

Gold Jimny the best colour (sold) :(

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

Time to create page: 0.115 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.