need a mechanic in ayrshire who knows about jimny

as title,

my jimny went into a local garage in maybole to get a wheel bearing and kinpins replaced on the drivers side, it came out with a heavy pull to the left when braking and the 4wd not working,

garage had it back to day, sorted the left pull but not the 4wd, he said he had a "land rover specialist" look at it and couldnt find the cause.

the 4wd light stays on as normall but both front hubs dont engage, it was working fine before the garage had it,

any ideas as to what i can do, ie legaly,

can i get a 4x4 specialist to sort it and send the bill to the local garage?

im really pissed of with them, had it in for welding last week and he didnt do what i asked, left a patch i had siliconed a plate over and said it would pass a mot like that!

ive checked all the vacume pipes and all seem fine, i dont know if they sealed the hubs or not, he had them off again today

Its pretty easy to block the air pipes inside the hubs with grease when fitting bearings.... I'd look there if i were you, although i bet you dont have a 'jimny hub removal tool'

Gary

Its pretty easy to block the air pipes inside the hubs with grease when fitting bearings.... I'd look there if i were you, although i bet you dont have a 'jimny hub removal tool'

Gary

its working now, dont know why but i checked tonight and pops in and out fine, only thing is i used to hear it locking, now i cant

its probably blown the grease out of the airholes, now theyre nicely greased you probably wont hear them

mlines wrote:

And don't let a landrover specialist look at it - if it can't be hit with a heavy hammer then a landrover specialist can't fix it!

Martin

does a heavy hammer not fix all cars?

you dont need to tell me about land rovers that what im selling, and in my tool kit there is 3 hammers.

i should have put a swear box in it as well could have made myself a fortune.