Halfords Dog-Taxi

Halford wrote: :ohmy: busted

you can never have too many anchoring points when out playing

Gave me terrific flash backs of the documentary that was on c4 about dogging :sick:

Halford's Missus?!

Dogging

Halford wrote: Hi zaine

There's a cable with 4 pin connector taped to the wiring harness behind the left hand side rear trim panel, removing the tape gives you about 6 inches of cable play - I simply cut off the connector and attached the speaker cables using blue bullet/socket crimps, it's easy to figure out which cables go where, i.e. black stripe to black stripe - very easy novice DIY job.

Don't forget to "rip-off" the foam from behind the speaker grilles on the rear panels - to let the sound out.

for rear panel removal see here
s227.photobucket.com/albums/dd170/bishop...y%20rear%20speakers/ the password is: suzuki_jimny

does anyone know if all this applies to a 2002 hardtop?

decided to redo the rear space of the DogTaxi

found Wickes 3pk chipboard loft storage interlocking panels ideal @ only £6.98
320mm wide x 1220mm long x 18mm thick



2 of the boards are cut at 910mm wide



the board nearest the rear door needs radiused corners of 50mm, which just happend to be the size of a 500g coffee mate tub



the panel nearest the seats looks as below



and put them all together



that's the base done, just need to lock the panels together then make a removable tool storage box on the right, will update with the next steps soon

Looking good Halford very professional .................

Halford wrote: decided to redo the rear space of the DogTaxi

found Wickes 3pk chipboard loft storage interlocking panels ideal @ only £6.98
320mm wide x 1220mm long x 18mm thick

2 of the boards are cut at 910mm wide

the board nearest the rear door needs radiused corners of 50mm, which just happend to be the size of a 500g coffee mate tub

the panel nearest the seats looks as below

and put them all together

that's the base done, just need to lock the panels together then make a removable tool storage box on the right, will update with the next steps soon

Don't forget to pva glue the joints or if thay get WET that's where they will rot it will also help stop them from comeing apart