A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
G13BB Water Inlet Hose Replacement
- Crankshaft Culture
- Topic Author
- Offline
- New Member
-
Registered
25 May 2026 23:19 #264503
by Crankshaft Culture
I'm replacing the old coolant hoses on my 1998 Suzuki Jimny Wide (JDM 1.3 G13BB). Upper and lower rad hoses are done, but I figured I'd replace the "water inlet hose" while the coolant is drained. I cannot figure a good way to access the hose clamps (the spring kind) and get a good grip on this hose. The hose has the OEM part number 1785281A00 and is highlighted in green.
I can't imagine I'd need to pull the intake manifold off to access it. Any tips, or am I just in for more Jimny Gymnastics contorting myself to reach?
G13BB Water Inlet Hose Replacement was created by Crankshaft Culture
I'm replacing the old coolant hoses on my 1998 Suzuki Jimny Wide (JDM 1.3 G13BB). Upper and lower rad hoses are done, but I figured I'd replace the "water inlet hose" while the coolant is drained. I cannot figure a good way to access the hose clamps (the spring kind) and get a good grip on this hose. The hose has the OEM part number 1785281A00 and is highlighted in green.
I can't imagine I'd need to pull the intake manifold off to access it. Any tips, or am I just in for more Jimny Gymnastics contorting myself to reach?
Please Log in or Create an account to join the conversation.
Time to create page: 0.127 seconds