A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Front propshaft problem
6 years 11 months ago #215783
by giacomom
Replied by giacomom on topic Front propshaft problem
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 10022
- Thank you received: 2005
6 years 11 months ago #215790
by Lambert
Temeraire, paladin, lawful good.
Bellerophon, thief, chaotic evil.
Leviathan, barbarian, chaotic good.
Replied by Lambert on topic Front propshaft problem
By placing the spacer on the transfer box end that will allow more clearance as you will move the shaft forward relatively to the cross member and that will make it relatively higher as well because of trigonometry.
Temeraire, paladin, lawful good.
Bellerophon, thief, chaotic evil.
Leviathan, barbarian, chaotic good.
Please Log in or Create an account to join the conversation.
6 years 11 months ago #215791
by giacomom
Replied by giacomom on topic Front propshaft problem
let's hope
otherwise I will have to put shims under the genuine bushing ....
Giacomo
otherwise I will have to put shims under the genuine bushing ....
Giacomo
Please Log in or Create an account to join the conversation.
Time to create page: 0.079 seconds
