A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Boot panel replacement
- Jim Jimny
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
8 years 9 months ago #188846
by Jim Jimny
Replied by Jim Jimny on topic Re:Boot panel replacement
It's quite interesting seeing a picture with the floor removed, is it relatively level?, im thinking now as its a van maybe i will put a flat ally treadplate floor in, that would be more practical for me.
Please Log in or Create an account to join the conversation.
- MadsV
- New Member
-
Less
More
- Thank you received: 0
8 years 9 months ago #188853
by MadsV
Replied by MadsV on topic Re:Boot panel replacement
That shouldnt be any problem
Please Log in or Create an account to join the conversation.
8 years 9 months ago #188876
by Busta
Replied by Busta on topic Boot panel replacement
The ally would need some stiffening. A flat sheet would be very weak. Depending on your fabrication skills, it may be easier to fit a replacement floor then put the ally over the top.
Please Log in or Create an account to join the conversation.
Time to create page: 0.091 seconds
