A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
KINGPIN Problem part needed
- Jafco3331
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
18 Jul 2017 16:44 #182824
by Jafco3331
KINGPIN Problem part needed was created by Jafco3331
Hey my offside kingpin has gone i am needing the car before thursday night. (my cousins wedding and got a nice 500 mile round trip) i got a friend thats able to squeeze me in to fit the parts before hand. my question whats the best place to by the kingpin kit in time for delivery either tomorrow or thursday?
I have seen Jimny Bits got them does any one know if they can guarntee next day delivery i would phone them but i know its late in the day now.
Any help would be greatly appreciated
Cheers
Josh
I have seen Jimny Bits got them does any one know if they can guarntee next day delivery i would phone them but i know its late in the day now.
Any help would be greatly appreciated
Cheers
Josh
Please Log in or Create an account to join the conversation.
18 Jul 2017 20:29 - 18 Jul 2017 20:32 #182836
by Busta
Replied by Busta on topic KINGPIN Problem part needed
You can get the bearings and shaft seal over the counter at any decent bearing shop. They are standard industry sizes.
The big dust seal is Jimny specific but it's not compulsory to change it. I don't bother. If there is the slightest bit of corrosion on the swivel it doesn't seal anything anyway.
The big dust seal is Jimny specific but it's not compulsory to change it. I don't bother. If there is the slightest bit of corrosion on the swivel it doesn't seal anything anyway.
Last edit: 18 Jul 2017 20:32 by Busta.
Please Log in or Create an account to join the conversation.
- Jafco3331
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
19 Jul 2017 04:49 #182842
by Jafco3331
Replied by Jafco3331 on topic KINGPIN Problem part needed
cheers so its only the bearings i need and not the whole kit. there isnt much leaking from the bottom only when i have been checing for play
Please Log in or Create an account to join the conversation.
19 Jul 2017 05:10 #182843
by Busta
Replied by Busta on topic KINGPIN Problem part needed
I've only ever changed the bearings and the shaft seal.
The bearing is a 30302.
The seal is a 26x38x8 r23
The bearing is a 30302.
The seal is a 26x38x8 r23
Please Log in or Create an account to join the conversation.
Time to create page: 0.079 seconds
