A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Stuck in 4wd, pushbutton transfer case
- craggles
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
10 years 4 months ago - 10 years 4 months ago #169124
by craggles
Stuck in 4wd, pushbutton transfer case was created by craggles
I have a 2006 Jimny manual with pushbutton transfer case. The transfer case keeps getting stuck in 4wd and not disengaging. 4wd light was flashing on dash. My mechanic stuffed around with the shafts, now it's ok to drive (physically in 2wd) but the 4wd high light is still flashing AND the 4wd low light is flashing and beeping! Is there a transfer case control model (TCCM) reset procedure? Can someone please help?
Last edit: 10 years 4 months ago by craggles. Reason: add words
Please Log in or Create an account to join the conversation.
10 years 4 months ago #169127
by kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Replied by kirkynut on topic Stuck in 4wd, pushbutton transfer case
I think they have solenoids so it could just be that a solenoid is stuck - perhaps from lack of use?
Maybe a light tap with a hitting stick may release it to prove my theory?
Kirkynut
Maybe a light tap with a hitting stick may release it to prove my theory?
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
Time to create page: 0.081 seconds
