BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Winch and mount issues on 56 vvt

  • davert85
  • Topic Author
  • New Member
  • New Member
    Public
More
05 Jun 2016 10:51 #168015 by davert85
Winch and mount issues on 56 vvt was created by davert85
Hi all,
I had a winch fitted to my old Jim, a 51 plate, and I believe I used the hidden winch mount from bits 4 vits. I want to do the same to my new Jim, a 56 plate vvt. Now the problem I'm seeing is as I have air con there is a giant fan in the way. The winch mount try from jimny bits will apparently fit air con models, so that's fine, but from what I can see where the winch will sit there is absolutely no room for it. So how is it done? Has anyone fitted a winch to the same model as mine? Can I not use the hidden winch mount? Is it possible to fit a winch? (I'm sure it is lol)
Any help greatly appreciated.
Thanks

Please Log in or Create an account to join the conversation.

More
05 Jun 2016 22:10 #168044 by kirkynut
Replied by kirkynut on topic Winch and mount issues on 56 vvt
Why not email or phone Russ at Jimny Bits?

Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
The following user(s) said Thank You: davert85

Please Log in or Create an account to join the conversation.

  • davert85
  • Topic Author
  • New Member
  • New Member
    Public
More
07 Jun 2016 20:42 #168182 by davert85
Replied by davert85 on topic Winch and mount issues on 56 vvt

kirkynut wrote: Why not email or phone Russ at Jimny Bits?

Kirkynut


Probably the best solution. Thanks bud :)

Please Log in or Create an account to join the conversation.

Time to create page: 0.342 seconds
Joomla template by a4joomla