A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Offset Clarification
Less
More
- Posts: 764
- Thank you received: 227
10 years 8 months ago #164016
by zukebob
I started out with nothing & still have most of it left
Offset Clarification was created by zukebob
A little help for a stupid question.
I have had it in my mind that the offset for the standard wheels (2015 Jimny) are +5. I just saw a chart that lists the offset as +22. Can anyone confirm the correct figure?
Thanks
Bob
I have had it in my mind that the offset for the standard wheels (2015 Jimny) are +5. I just saw a chart that lists the offset as +22. Can anyone confirm the correct figure?
Thanks
Bob
I started out with nothing & still have most of it left
Please Log in or Create an account to join the conversation.
10 years 8 months ago #164081
by Halford
Replied by Halford on topic Offset Clarification
Might help ...
I've - 30 offset rims on now
Before this, I had 32mm spacer with std alloys
The current -30 rims appear slightly further out than the spacer/alloys combo
So I'd hazzard a guess that the std rims are indeed +5
But this is just ... IMO .. and I am occasionally wrong :blink:
I've - 30 offset rims on now
Before this, I had 32mm spacer with std alloys
The current -30 rims appear slightly further out than the spacer/alloys combo
So I'd hazzard a guess that the std rims are indeed +5
But this is just ... IMO .. and I am occasionally wrong :blink:
The following user(s) said Thank You: zukebob
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 764
- Thank you received: 227
10 years 8 months ago #164085
by zukebob
I started out with nothing & still have most of it left
Replied by zukebob on topic Offset Clarification
Thanks Halford. I am getting old but at least I'm not going crazy.
I started out with nothing & still have most of it left
Please Log in or Create an account to join the conversation.
10 years 7 months ago #164089
by Busta
Replied by Busta on topic Offset Clarification
Suzuki Jimny
PCD: 5x139.7
Centre bore: 108.4
Offset: 5
www.wheelfitment.eu/car/Suzuki/Jimny%20(1998%20-%20).html
PCD: 5x139.7
Centre bore: 108.4
Offset: 5
www.wheelfitment.eu/car/Suzuki/Jimny%20(1998%20-%20).html
The following user(s) said Thank You: zukebob
Please Log in or Create an account to join the conversation.
Time to create page: 0.079 seconds
