A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Overheating problem.
11 years 2 weeks ago #154882
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Overheating problem.
I should have said
If the head gasket is badly gone, air gets into the water jacket, and not all the water gets back, when you undo the rad cap with the engine stone cold it hisses, and there is an airspace in the top.
If you undo the cap when it is hot (rubber pipes under pressure) most of the water will spurt out, and you will be lucky not to get scalded.
If the head gasket is badly gone, air gets into the water jacket, and not all the water gets back, when you undo the rad cap with the engine stone cold it hisses, and there is an airspace in the top.
If you undo the cap when it is hot (rubber pipes under pressure) most of the water will spurt out, and you will be lucky not to get scalded.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- Lewg123
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 2 weeks ago #154884
by Lewg123
Replied by Lewg123 on topic Overheating problem.
Thanks for the help mate. He's been quoted £200 for an engine change so just gonna go with that. Thanks for the help
Please Log in or Create an account to join the conversation.
Time to create page: 0.081 seconds
