A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Are replacement panels available?
- Robmac
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 3 weeks ago #154328
by Robmac
Are replacement panels available? was created by Robmac
Hello all,
I've just got a 2001 Jimny as a project but having stripped the front bumper off and the wings didn't expect to find so much concealed rust to the front slam panel and cross member below. I've searched online to see if replacement panels are available without success. Can anyone point me in the right direction or is it a case of fabricating your own or cutting sections out at a scrapyard and welding them in (assuming there must be some good front ends out there!)
Rob
I've just got a 2001 Jimny as a project but having stripped the front bumper off and the wings didn't expect to find so much concealed rust to the front slam panel and cross member below. I've searched online to see if replacement panels are available without success. Can anyone point me in the right direction or is it a case of fabricating your own or cutting sections out at a scrapyard and welding them in (assuming there must be some good front ends out there!)
Rob
Please Log in or Create an account to join the conversation.
- Basketcase
- New Member
-
Less
More
- Thank you received: 0
11 years 3 weeks ago #154342
by Basketcase
Replied by Basketcase on topic Are replacement panels available?
You'd more than likely have to get those sort of panels from Suzuki themselves or just as you say make new or cut out of another good body shell
Please Log in or Create an account to join the conversation.
Time to create page: 0.074 seconds
