A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
265/75r16
- Langdonm
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
02 Oct 2015 19:58 #152881
by Langdonm
265/75r16 was created by Langdonm
Guys can anyone give advice please
I've bout 265/75/r16 wheels and tyres , will they fit ok if I cut the arches ? And any advice on doing it aswell please
Hopefully want to get them on tomorrow
Thanks in advance
I've bout 265/75/r16 wheels and tyres , will they fit ok if I cut the arches ? And any advice on doing it aswell please
Hopefully want to get them on tomorrow
Thanks in advance
Please Log in or Create an account to join the conversation.
- OllieNZ
- New Member
-
Public
Less
More
- Thank you received: 0
02 Oct 2015 20:14 #152883
by OllieNZ
Replied by OllieNZ on topic Re:RE: 265/75r16
Have you got any sort of lift?Langdonm wrote: Guys can anyone give advice please
I've bout 265/75/r16 wheels and tyres , will they fit ok if I cut the arches ? And any advice on doing it aswell please
Hopefully want to get them on tomorrow
Thanks in advance
Please Log in or Create an account to join the conversation.
- Langdonm
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
02 Oct 2015 20:20 #152884
by Langdonm
Replied by Langdonm on topic Re:RE: 265/75r16
No haven't got any lift yet
I tried putting the wheel on but wouldnt go near the hub , if I cut away some of the arches they will go on I hope
I tried putting the wheel on but wouldnt go near the hub , if I cut away some of the arches they will go on I hope
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2989
- Thank you received: 673
02 Oct 2015 20:32 #152885
by jackonlyjack
Replied by jackonlyjack on topic Re:RE: 265/75r16
around 32"high and 10" width that's going to be some serious trimming
do you still have standard transfer box aswell
do you still have standard transfer box aswell
Please Log in or Create an account to join the conversation.
- Langdonm
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
02 Oct 2015 21:08 #152889
by Langdonm
Replied by Langdonm on topic Re:RE: 265/75r16
Yes mate all is standard , I don't mind trimming loads of just don't want to waste my time if there not going to fit so was hoping for some advice
Please Log in or Create an account to join the conversation.
Time to create page: 0.174 seconds