A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Will they fit and how high should I go!!!!!
- newholland1234
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
19 Aug 2015 19:53 #150202
by newholland1234
Will they fit and how high should I go!!!!! was created by newholland1234
Hi thanks for your advice already about what to do to my jimny.
I've been looking on jimnybits web site and I'm thinking of fitting 225 mud max tyres with a 2 " lift kit.
With a two inch lift can I get away with fitting just shocks and springs or do I need to fit a complete lift kit also
Will 225 75 15 mud max tyres fit under the arches?
I've been looking on jimnybits web site and I'm thinking of fitting 225 mud max tyres with a 2 " lift kit.
With a two inch lift can I get away with fitting just shocks and springs or do I need to fit a complete lift kit also
Will 225 75 15 mud max tyres fit under the arches?
Please Log in or Create an account to join the conversation.
19 Aug 2015 21:07 #150215
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Will they fit and how high should I go!!!!!
For road use at least fit caster bushes
If offroad take the anti roll bar off and fit longer brake hoses
225 should be fine as 2" but front bumper may need a trim
If offroad take the anti roll bar off and fit longer brake hoses
225 should be fine as 2" but front bumper may need a trim
Gold Jimny the best colour (sold)

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
Time to create page: 0.252 seconds