A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

makeshift clutch tool

mark 88
Topic Author
New Member
Public

15 Aug 2015 08:41 #149844 by mark 88

makeshift clutch tool was created by mark 88

hi all im doing a clutch on a pals jimny but sadly we dont have an alignment tool
does anyone have an idea on what we can use to make do? thanks all

Please Log in or Create an account to join the conversation.

wombat
New Member
Public

15 Aug 2015 09:04 #149845 by wombat

Replied by wombat on topic makeshift clutch tool

Hi, try using a round bar built up with insulating tape to fit the spigot bearing and clutch plate

Please Log in or Create an account to join the conversation.

idiotmobil
New Member
Public

15 Aug 2015 11:16 #149849 by idiotmobil

Replied by idiotmobil on topic makeshift clutch tool

Deep Socket the right size with a long bolt through with masking tape to build both up to size needed works great diffrent size socket for diffrent clutches no need for tool

Please Log in or Create an account to join the conversation.

mark 88
Topic Author
New Member
Public

19 Aug 2015 09:09 #150146 by mark 88

Replied by mark 88 on topic makeshift clutch tool

yeah that sounds thanks all

Please Log in or Create an account to join the conversation.

Time to create page: 0.626 seconds

makeshift clutch tool

Events Menu