A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Bolts holding the Disk backing plate & Hub flange
- Shellie
- Topic Author
- New Member
-
Public
05 Jul 2015 10:04 #147239
by Shellie
Bolts holding the Disk backing plate & Hub flange was created by Shellie
Need the 4x bolts that are behind the brake disk holding the Disk backing plate & Hub flange to Hub body
When taking apart to replace Kin pin bearing the bolts were so rounded off had to use a "Irwin Bolt Grip" socket and a extra long spanner, which got them out, but wrecked the heads in the process.
So I am after replacements. Any suggestions apart from a Suzuki dealer.
When taking apart to replace Kin pin bearing the bolts were so rounded off had to use a "Irwin Bolt Grip" socket and a extra long spanner, which got them out, but wrecked the heads in the process.
So I am after replacements. Any suggestions apart from a Suzuki dealer.
Please Log in or Create an account to join the conversation.
- gusthegorilla
- New Member
-
Public
05 Jul 2015 10:24 #147241
by gusthegorilla
Replied by gusthegorilla on topic Bolts holding the Disk backing plate & Hub flange
BigJimny shop...Martin has everything you need...AND, you'll know you're getting the right ones 
Gus
Gus
Please Log in or Create an account to join the conversation.
Time to create page: 0.200 seconds