A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
gear knob
26 Jun 2015 09:33 #146616
by X8GGY
Unscrew it... "righty tighty, lefty loosey"
There's normal some glue in it, but you'll crack it with a good twist...
Dave
There's normal some glue in it, but you'll crack it with a good twist...
Dave
Please Log in or Create an account to join the conversation.
26 Jun 2015 10:04 #146619
by Halford
Thanks Dave
Stuck solid,
even tried mole grips on shaft as whole assembly was twisting.
Stuck solid,
even tried mole grips on shaft as whole assembly was twisting.
Please Log in or Create an account to join the conversation.
27 Jun 2015 14:12 #146696
by X8GGY
Here's a photo of my knob Halford...
You can see the gunge on it that was left on the end after I was pulling it off...
I hope this helps? :woohoo:
You can see the gunge on it that was left on the end after I was pulling it off...
I hope this helps? :woohoo:
Please Log in or Create an account to join the conversation.
Time to create page: 0.143 seconds