A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

G13bb low Rev Splutter

Crash
Topic Author
New Member
Public

16 Mar 2015 18:16 - 16 Mar 2015 18:17 #140710 by Crash

G13bb low Rev Splutter was created by Crash

just wondering if anyone has seen this before and may know of the cause. I seem to be getting a bit of a splutter when accelerating on low revs (as I change gear). Doesn't seem to happen if slowly accelerating though and seems to be noticeable when it's up to temperature. Noticed today after a real engine warm up run that when stationary now with a Rev it splutters and I get a few pops on the exhaust.

Any ideas?

Thanks

Last edit: 16 Mar 2015 18:17 by Crash.

Please Log in or Create an account to join the conversation.

mickt
New Member
Public

16 Mar 2015 19:28 #140722 by mickt

Replied by mickt on topic G13bb low Rev Splutter

Bunged up Cat?

Please Log in or Create an account to join the conversation.

Crash
Topic Author
New Member
Public

16 Mar 2015 19:38 #140727 by Crash

Replied by Crash on topic G13bb low Rev Splutter

Hi, thanks for the reply. Not sure, anyway to tell? Tbh I was looking at changing the whole system as the whole exhaust has seen better days.

Please Log in or Create an account to join the conversation.

Crash
Topic Author
New Member
Public

20 Mar 2015 17:42 #141003 by Crash

Replied by Crash on topic G13bb low Rev Splutter

Anyone have anyway of checking the cat before I buy a new one? Misfiring quite bad on low revs now when warn and even more when hot.

Thanks

Please Log in or Create an account to join the conversation.

j999pre
Offline
Platinum Member
Registered

20 Mar 2015 18:03 #141004 by j999pre

Replied by j999pre on topic G13bb low Rev Splutter

Cam sensor?

Gold Jimny the best colour (sold)

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

Crash
Topic Author
New Member
Public

21 Mar 2015 19:14 #141071 by Crash

Replied by Crash on topic G13bb low Rev Splutter

Thanks for the replies, searched Google for cam sensor issues and got a lot of results from people with the same issues so have ordered one for Monday.

Please Log in or Create an account to join the conversation.

Time to create page: 4.617 seconds

G13bb low Rev Splutter

Events Menu