A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Front Bumper Removal
- gary410
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 9 months ago #136128
by gary410
Front Bumper Removal was created by gary410
Can someone please run through how to remove the front Bumper. Is there anything I need to beware of ?.
I've found a bit of rust behind the headlights and want to take the inner wheel arch plastic liner and bumper off to assess
I also may have to take the front wings off if welding is needed; do they just bolt off ?
Thanks in advance for any advice.
I've found a bit of rust behind the headlights and want to take the inner wheel arch plastic liner and bumper off to assess
I also may have to take the front wings off if welding is needed; do they just bolt off ?
Thanks in advance for any advice.
Please Log in or Create an account to join the conversation.
- X8GGY
- New Member
-
Less
More
- Thank you received: 0
11 years 9 months ago #136129
by X8GGY
Replied by X8GGY on topic Front Bumper Removal
This might help -
www.bits4vits.co.uk/ORAWP.pdf
- installation instructions for the ORA's winch plate, which shows you how to take the bumper off 
Dave
Dave
Please Log in or Create an account to join the conversation.
- gary410
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 9 months ago #136136
by gary410
Replied by gary410 on topic Front Bumper Removal
Thanks Jimny-Dave thats great. Looks easy and with bumper, inner arch plasic liner and headlamp removed I should be able get to the area needed.
Please Log in or Create an account to join the conversation.
Time to create page: 0.081 seconds
