A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Hubs again!
- troggy
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 10 months ago #135276
by troggy
Hubs again! was created by troggy
Hi all,
I've been doing a bit to try to get vac working again. Hubs now lock but do not unlock.
Blowing down the pipes near the hub show one to be impossible to do but other blowing free. Should this happen?
If I suck hard enough should the hub then unlock. Is there a seal gone in the hub or am I missing something.
Is blowing a Jimny an offence?
I've been doing a bit to try to get vac working again. Hubs now lock but do not unlock.
Blowing down the pipes near the hub show one to be impossible to do but other blowing free. Should this happen?
If I suck hard enough should the hub then unlock. Is there a seal gone in the hub or am I missing something.
Is blowing a Jimny an offence?
Please Log in or Create an account to join the conversation.
- troggy
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 10 months ago #135277
by troggy
Replied by troggy on topic Hubs again!
Sorry I meant to put this in the 'technical' bit.
Please Log in or Create an account to join the conversation.
- gusthegorilla
- New Member
-
Less
More
- Thank you received: 0
11 years 10 months ago #135279
by gusthegorilla
Isn't that something along the line of "Mountain Goats is illegal!! :whistle:
Replied by gusthegorilla on topic Hubs again!
troggy wrote: Sorry I meant to put this in the 'technical' bit.
Isn't that something along the line of "Mountain Goats is illegal!! :whistle:
Please Log in or Create an account to join the conversation.
- troggy
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 10 months ago #135281
by troggy
Replied by troggy on topic Hubs again!
You just don't know how much I love my Big Jim!
Please Log in or Create an account to join the conversation.
- troggy
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 10 months ago #135315
by troggy
Replied by troggy on topic Hubs again!
61 views!
I know that YOU reading this right now know the answer!
I know that YOU reading this right now know the answer!
Please Log in or Create an account to join the conversation.
11 years 10 months ago #135316
by Busta
Replied by Busta on topic Hubs again!
I've never tried blowing down the pipes but if there's no restriction it sounds like thats your problem! Are you blowing towards the hub or back towards the controller? If it's in the hub, check your wheel bearings. If they are gone out won't seal.
The following user(s) said Thank You: troggy
Please Log in or Create an account to join the conversation.
Time to create page: 0.123 seconds
