A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
how do i pluck a hawk
- mark 88
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 10 months ago #134313
by mark 88
how do i pluck a hawk was created by mark 88
hi all my jimny has a hawk immobilizer fitted. after getting the fob wet it wasn't working so i thought id be old school and unlock the door with a key which was a very bad idea and so off went the alarm and it wouldnt run.
the fob is dry now and is flashing but jinmy not having it and so my ideas are as follows.
1 rip that heap of sh#t out
2 reprogram the fob
if anyone can tell me how to do ether one of these preferably option 1
thanks all
the fob is dry now and is flashing but jinmy not having it and so my ideas are as follows.
1 rip that heap of sh#t out
2 reprogram the fob
if anyone can tell me how to do ether one of these preferably option 1
thanks all
Please Log in or Create an account to join the conversation.
- X8GGY
- New Member
-
Less
More
- Thank you received: 0
11 years 10 months ago #134324
by X8GGY
Replied by X8GGY on topic how do i pluck a hawk
Are you in the AA or RAC ?
Please Log in or Create an account to join the conversation.
- mark 88
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 10 months ago #134338
by mark 88
Replied by mark 88 on topic how do i pluck a hawk
id rather remove it myself and kick it as hard and as far away as possible
Please Log in or Create an account to join the conversation.
Time to create page: 0.094 seconds
