A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Cb problems
- Longman
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 11 months ago #131941
by Longman
Cb problems was created by Longman
Hi all went to use my cb on Saturday and it's not working fully I can hear other people but they can't hear me ,has anyone got any ideas what is wrong
Please Log in or Create an account to join the conversation.
11 years 11 months ago #131942
by maverick
Jalapeño, IISY?
Replied by maverick on topic Cb problems
Speaker broken?
what make and model is it, then look on Google.
what make and model is it, then look on Google.
Jalapeño, IISY?
Please Log in or Create an account to join the conversation.
- Longman
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 11 months ago #131944
by Longman
Replied by Longman on topic Cb problems
It's a moonraker minor 40 channel I've had a look on Google but just says check all connection which I have done
Please Log in or Create an account to join the conversation.
11 years 11 months ago #131947
by kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Replied by kirkynut on topic Cb problems
Have a look on the Mic plug to make sure none of the wires have broken or come adrift.
Kirkynut
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
The following user(s) said Thank You: Longman
Please Log in or Create an account to join the conversation.
- Longman
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 11 months ago #131949
by Longman
Replied by Longman on topic Cb problems
Nice one kirkynut I've just taken the mic plug apart and there is a broken wire at the plug now where's my soldering iron
Please Log in or Create an account to join the conversation.
- GuardianAngel
- New Member
-
Less
More
- Thank you received: 0
11 years 11 months ago #131950
by GuardianAngel
Replied by GuardianAngel on topic Cb problems
You don't have a Noise Blanking mode do you? I had this enabled at the weekend and I could not hear anything. This mode apparently stops interference from the ignition system but in fact stops everything
Please Log in or Create an account to join the conversation.
Time to create page: 0.099 seconds
