A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
step by step g16b conversion guide ☺☺ wanted....
- suzukisam
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 11 months ago #130462
by suzukisam
step by step g16b conversion guide ☺☺ wanted.... was created by suzukisam
Hi im sure this has been covered loads of times but im after a guide to show me which bits to swap etc when fitting a g16b baleno engine into jimny if anyone can help i had a great guide saved on my old phone but since got a new one and can no longer find it again cheers sam
Please Log in or Create an account to join the conversation.
11 years 11 months ago - 11 years 11 months ago #130551
by Rhinoman
Some Suzukis and a bunch of motorcycles.
Replied by Rhinoman on topic step by step g16b conversion guide ☺☺ wanted....
There was a good thread on Difflock.com by simondoc here:
forum.difflock.com/viewtopic.php?t=25906...storder=asc&start=30
There are also a number of good threads on Auszookers.com, you may need to register
www.auszookers.com/forum/viewforum.php?f=17
forum.difflock.com/viewtopic.php?t=25906...storder=asc&start=30
There are also a number of good threads on Auszookers.com, you may need to register
www.auszookers.com/forum/viewforum.php?f=17
Some Suzukis and a bunch of motorcycles.
Last edit: 11 years 11 months ago by Rhinoman. Reason: add link
The following user(s) said Thank You: suzukisam
Please Log in or Create an account to join the conversation.
- suzukisam
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 11 months ago #130570
by suzukisam
Replied by suzukisam on topic step by step g16b conversion guide ☺☺ wanted....
Thankyou
Please Log in or Create an account to join the conversation.
Time to create page: 0.112 seconds
